AHA25AFB-26R7 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AHA25AFB-26R7 is a kind of chassis mount resistor, which is mainly used as a voltage divider. The resistor comes in a 0.25W configuration, made of aluminum and ceramic with a temperature coefficient of 200ppm/°C. It features a low-inductance, high-phase shift through its encapsulation with zigzag PEEK construction and low ESR.

The AHA25AFB-26R7 is designed to offer superior power handling capabilities, and offers a wide variety of options in terms of series and parallel connections. It is also designed to withstand high current and high voltage environments. This makes it an ideal option for applications with power electronics and motor drives, where high power demands can cause significant electrical losses due to thermal runaway.

In terms of working principle, the AHA25AFB-26R7 operates as a two-terminal voltage or current divider. It is designed to provide a fixed voltage or current level when applied with a AC or DC voltage. The two leads of the resistor are connected to two external terminals, usually through terminals on the chassis. The external terminals are then connected to the device’s load, which is usually a segment of a circuit board.

The current in the circuit is divided up by the resistor, with the voltage at each terminal depending on the resistance. The total current in a circuit is equal to the sum of the currents through each individual element, which is defined by Ohm’s law. In this case, the current in the circuit is equal to the voltage at the two external terminals divided by the total series resistance, which in this case is the AHA25AFB-26R7’s resistance.

The AHA25AFB-26R7 is widely used in many industries including automotive, aerospace, telecommunications, and consumer electronics. It can be found in automotive engine systems, power inverters, high-efficiency power supplies, DC/DC converters, and RF systems. In all these applications, the AHA25AFB-26R7 is used to provide exact control of voltage and current levels, as well as provide maximum power handling. It is also used to protect against sudden power spikes and protect against potential burn-out situations.

In conclusion, the AHA25AFB-26R7 is an important component within the automotive, aerospace, telecommunications, and consumer electronics industries, because it provides an effective way to control voltage and current levels. It is also designed to withstand high current and high voltage environments, and provide superior power handling capabilities. It is a valuable addition to any system that requires superior power handling, as well as protection against potential breach of safety standards.

The specific data is subject to PDF, and the above content is for reference