Allicdata Part #: | VE-2TY-EW-F4-ND |
Manufacturer Part#: |
VE-2TY-EW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 3.3V 66W |
More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 2... |
DataSheet: | VE-2TY-EW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VE-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 66V |
Voltage - Input (Max): | 160V |
Voltage - Output 1: | 3.3V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 20A |
Power (Watts): | 66W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -10°C ~ 85°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are one of the most common and versatile pieces of power equipment used in various electronics applications. VE-2TY-EW-F4 is a booster circuit which is a type of DC-DC converter widely used for many applications in industrial and automotive applications. This high-efficiency circuit module is suitable for medium-power applications, such as battery-to-load, solar-to-grid connection, and electric vehicle charging.
VE-2TY-EW-F4 boosters are one of the most common forms of isolated DC–DC converters. They are used to convert energy from a source with a low voltage and moderate current to a device with a higher voltage and higher current. This type of converter offers a wide range of advantages, including robustness and improved energy efficiency over period of use.
The main purpose of the VE-2TY-EW-F4 applications is to boost the voltage of a low voltage signal or power source. This is typically achieved by using a switching regulator integrated circuit (IC) with an external transformer to increase the voltage of the input signal. The typical power rating of the VE-2TY-EW-F4 transformer is from 30 watts to 500 watts, and the input voltage range is from 0.8 to 11 volt. The output voltage range of the VE-2TY-EW-F4 module is from 11 to 500 volts.
The working principle of VE-2TY-EW-F4 modules is based on the use of a switching regulator IC. This IC applies electrical oscillation to the coil of the transformer, which is actually a miniature AC. This AC is then rectified and regulated by the IC, resulting in an output voltage that is higher than the input voltage. The current ration of the IC is adjustable with external components such as resistors and potentiometers.
VE-2TY-EW-F4 modules are used in a variety of applications, including power management systems, 5V/12V/24V/48V power supplies, solar charge controllers, battery chargers, and low-voltage devices. They have been developed to meet the extremely harsh environmental conditions of electrically powered vehicles and provide reliable and robust performance. Their high efficiency, wide input voltage range, and compact size make them ideal for both automotive and industrial applications.
In conclusion, VE-2TY-EW-F4 modules are a versatile and reliable type of DC-DC converter, suitable for many medium-power applications in industrial and automotive industries. Its simple design, high efficiency and low cost, make it one of the most widely used DC-DC converters. It is capable of boosting signals from a low voltage to a higher voltage, and can be easily adjustable with either external components or integrated circuit.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...