S3D-TP Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single-dierected, three-dimensionally transposed, (S3D-TP) is an application commonly used for high frequency power conversion. It consists of two isolated sections: a primary winding connected in series with a diode bridge and a secondary winding in series with an output rectifier. The primary and secondary windings are wound on two separate sections of the transformer.

S3D-TP technology works by providing a three-dimensional transposed configuration of the components. This configuration produces two distinct sources of energy, usually from the same phase of a voltage waveform, allowing for efficient conversion between the primary and secondary side of the transformer. It also prevents current flow in the bridged direction, thus providing high-efficiency rectification of the output signal.

In high frequency power conversion, the goal is to reduce the consumption of power while still maintaining a high degree of efficiency. This is where S3D-TP becomes attractive. By using the S3D-TP configuration, power losses resulting from the rectification of the signal are drastically reduced. In addition, due to the three-dimensional transposition, the conductor cross section of the transformer is minimized, thus reducing the overall size of the device.

The working principle of S3D-TP is based on the concept of a magnetic field. The transformer consists of two windings, one primary and one secondary. The primary winding is connected in series with a diode bridge and the secondary winding is connected in series with an output rectifier. The transformer transmits magnetic flux from the primary winding to the secondary winding, resulting in a net electrical current flow from the primary to the secondary. This current flow is what enables the conversion of power between the two windings.

S3D-TP is an efficient way to convert electricity by reducing power losses, improving system efficiency and downsizing the transformer. It is commonly used in high frequency circuits such as digital signal processors, switched mode and regulated power supplies, and motor control applications. This technology is also used to provide isolated power and energy storage applications. In addition, S3D-TP can be used to reduce the size of the transformer and save money on the overall cost of the circuit.

In conclusion, S3D-TP is a versatile technology that can be used to reduce power losses, improve system efficiency, save money and reduce the size of power conversion systems. It is a great tool for designers to use in high frequency circuits and applications that require efficient conversion between primary and secondary sources of power.

The specific data is subject to PDF, and the above content is for reference