0034.3125.PT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Today, the use of fuses is ubiquitous throughout many industries, including electronics, telecommunications, and automotive. The 0034.3125.PT is one of the many types of fuses available for various applications. This fuse has a rated current capacity of 32A, and a voltage rating of 125V. It can be used in any electrical circuit that requires protection against overloads and short circuits.

The primary purpose of a fuse is to act as an overload and circuit breaker. It does this by allowing a certain amount of current to pass through it in a normal state. When too much current passes through, the element within the fuse will heat up and melt, thus opening the circuit and breaking the connection. This element is called the fuse element, and is usually made from a highly conductive material such as copper or silver. The amount of current the fuse element can carry depends on its size and material.

The 0034.3125.PT fuse features a positive-temperature coefficient (PTC) as its fuse element. This means that the resistance of the element increases when the temperature rises. As the current passing through the element increases, the temperature will rise. Once the temperature reaches the specified trip point, the resistance of the element will have increased enough to cause an arc to form between the element and the contacts, as well as a gap in the circuit which causes the necessary task of breaking the connection.

In normal operation, the fuse element may see current levels beyond its rated current capacity, but not enough to cause the temperature of the element to reach the trip point. The necessary trip point is determined by the size of the element and the amount of current it can carry, and is based on the amount of current that will be allowed to pass through it before it breaks the circuit. This is known as the fuse\'s current-limiting capability.

In a circuit, the 0034.3125.PT fuse will provide protection by interrupting current whenever the current demand rises to a point higher than its current rating. Assuming the fuse has been properly sized for the application, and is not subjected to constant power fluctuations, it should provide reliable service for the life of the circuit. It\'s important to note, however, that this type of fuse should not be used for applications with constant power surges, or if the nature of the load is unknown or is likely to change.

The 0034.3125.PT is a reliable and effective fuse for many applications. Its use of a PTC fuse element allows it to provide overload protection against current flaws as well as short-circuits. Its size and current rating make it ideally suited for a variety of electronic and electrical circuits. With proper installation and selection, it can provide circuit protection for many years with minimal maintenance.

The specific data is subject to PDF, and the above content is for reference