BK/GBA-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BK/GBA-5 fuse is an electrical, specialty fuse. It is important to understand the application field and working principle of this fuse before attempting to use it. In this article we will discuss the application field and working principle of the BK/GBA-5 fuse.

The BK/GBA-5 fuse is designed for use in thermal or magnetic circuit protection. It is typically used in equipment such as; Air conditioning, heating, and ventilation equipment, motor control centers, and motor starters. In general, it can be used as a protection device in any electric circuit where a thermal or magnetic over current must be protected.

The BK/GBA-5 fuse is designed to be the primary over current protection for a circuit. It is important to remember that the fuse should not be utilized for branch circuits. Additionally, the fuse must be protected by a full-voltage disconnect before it is installed in the circuit.

The working principle of the BK/GBA-5 fuse is quite simple. The fuse is capable of sensing an overcurrent condition and then clearing the circuit. This is accomplished by the fuse element melting and opening the circuit when a certain level of overcurrent is reached. When the overcurrent is removed, the fuse is automatically reset and the circuit is restored.

The BK/GBA-5 fuse is typically rated at 10 or 15 amperes with an interrupting capacity of 20 amperes. For larger applications, the fuse can be used in conjunction with other over current protection devices, such as a time-delay breakers or an overload relay. In this configuration, the BK/GBA-5 fuse provides the initial protection, while the other over current protection devices provide backup protection for the circuit.

The BK/GBA-5 fuse must be correctly rated designed based on the expected ampacity of the circuit. The fuse must be sized to provide the correct protection for the circuit, while not interrupting normal current flow. Additionally, the fuse must be designed to provide the correct level of over current protection for the application. Too much over current protection could cause the circuit to be overloaded, while not enough could cause the circuit to be under-protected.

The BK/GBA-5 fuse is a reliable and efficient way to provide over current protection for electrical circuits. It is important to understand the application field and working principle before attempting to use the fuse. By correctly sizing and designing the fuse, one can be sure to provide adequate over current protection for any application.

The specific data is subject to PDF, and the above content is for reference