H3BBT-10106-L8

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	6.00" (152.40mm)
Wire Gauge:	28 AWG
Contact Finish:	Tin
Color:	Blue
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are short, prefabricated electrical wires that are typically used to connect two points on a circuit board or other electrical device. They are also known as patch wires, flying leads, and jumper leads. They come in various lengths and diameters, and the ends of the wires are either stripped or pre-crimped. Jumper wires can be used for a variety of applications, including prototyping, testing, and electronics repair.Jumper wires are generally made using copper or aluminum wire and are insulated with various materials such as PVC or silicone rubber. The insulation helps prevent electrical shock or short circuits and aids in heat dissipation. The ends of the wires are typically stripped or pre-crimped with a standard male or female pin or terminal. The pre-crimped option can make it easier to connect and disconnect components, and is preferred for high-voltage applications.

Pre-Crimped Leads

Pre-crimped leads are a type of pre-fabricated electrical leads that are already pre-crimped and insulated with plastic or rubber. They are typically used to connect two circuit board components together, and are usually connected with a male and female pin. Pre-crimped leads are commonly used in automotive wiring projects and other applications that require a reliable connection.Pre-crimped leads are usually made from copper wire or cable and insulated with PVC or silicone rubber. They can be purchased in different lengths and diameters, depending on the application. The ends of the wires are usually pre-crimped with a terminal made either from metal or plastic. The terminal has a male or female pin that can be easily plugged into another pin or connector. Pre-crimped leads typically have a higher tolerance for electrical current than bare wires, and are preferred for high-voltage and/or high-current applications.

H3BBT-10106-L8 application field and working principle

The H3BBT-10106-L8 is a type of jumper wire produced by Hirose. It is designed for car stereo and speaker systems as well as other high-quality audio applications. The wires are made using a stranded copper core and are insulated with a polyurethane based material (PUR). The ends of the wires are pre-crimped with standard male or female connectors.The H3BBT-10106-L8 jumper wires are designed to have a high current carrying capacity and a very low DC resistance, which helps to minimize signal loss and noise. The connectors are designed to be water-resistant and dustproof, which makes them ideal for outdoor and automotive applications.The typical working principle of the H3BBT-10106-L8 relies on the electrical current passing through the wires. When a voltage is applied to the system, an electric current is generated, which then passes through the wires at a certain rate. The rate of the current depends on the resistance of the system. The current carries energy in the form of heat and transfers it from one point to another. This energy is then used to power various components of the system, such as speakers, amplifiers, and head units. The H3BBT-10106-L8 jumper wires ensure that the current is transferred efficiently with minimal loss of energy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description