0152680163

Series:	Premo-Flex™ 15268
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	10
Pitch:	0.049" (1.25mm)
Length:	10.0" (254.0mm)
Length - Exposed Ends:	0.197" (5.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>Flat Flex Cables</h2><p>Flat Flex (FF) cable is an interconnect solution used in applications where there is a need for maximum flexibility and wearability, but very little space. It is made up of a series of wires or strips with the conductors secured to the circuit board or other device by a combination of pressure and solder. FF cables are typically multi-strand or multi-wire, and made up of insulated coated single-strand or double-strand copper wires that are laid side by side in multiple layers. This creates a flat "ribbon" cable that can be bent into a wide variety of shapes and provides reliable electrical connection points for each wire.</p><p>FF cable is used for many applications, including automotive electrical systems, medical device, military applications, and consumer electronics. The wires are also used to power LED devices and small switches. FF cable is also ideal for applications where space is at a premium, such as on circuit boards or in tight spaces such as computer cases.</p><h2>Ribbon Jumper Cables</h2><P>Ribbon jumper cables are used to interconnect two boards, components, or pieces of equipment without the use of a soldering iron. This is accomplished by using a flat ribbon cable that has wires (or connectors) along either side of the cable that are connected to a board or component, thus creating a “jumper” and connecting the two pieces of equipment. This type of interconnect is very popular with today’s miniaturized electronic circuits, as it provides a fast and efficient connection.</p><p>Ribbon jumper cables have two common types of wires; stranded and solid. Stranded wire is made up of many strands of insulated wire fused together to form one larger conductor. This is used where flexibility is needed, such as in an automobile or robot. Solid wires are made up of just one big, solid wire and can be used in a variety of different applications, including those needing very low resistance.</p><p>Ribbon jumper cables have an advantage over traditional soldering methods since they are quick and easy to connect and disconnect. This makes them ideal for use in applications where the system needs to be frequently accessed, such as in diagnostic tests. Ribbon jumper cables can also be used in applications where space is limited, such as a circuit board, and since there is no soldering involved it is easy to rearrange or replace them.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description