0460121141-11-S9-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0460121141-11-S9-D is a type of jumper wire or pre-crimped lead, used to connect two ends of a cable or to connect a variety of components such as connectors, switches, alarms, etc. The wire is housed inside an insulated sheath, with pins on each end that allow for easy connection. This type of jumper wire is commonly used in a wide variety of applications, such as for industrial, automotive, and electronics applications.

The 0460121141-11-S9-D is a standard size for jumper wires, with a nominal length of 11 inches (279.4 millimeters) and a 14-gauge diameter. The wire is constructed with a high-grade copper that is insulated in a polyethylene insulated jacket. It can be cut to any desired length and the insulation makes it resistant to abrasion, chemical, and electrical stress.

The primary application of 0460121141-11-S9-D is in connecting two different circuits, but this jumper wire is also useful for testing circuits, such as when there is no existing connection between two points. For example, if a switch needs to be tested in a fixture or other device, a jumper wire can be used to provide the connection without having to take apart the entire circuit. The same is true of other components, such as connectors, switches, alarms, and so on.

The working principle of 0460121141-11-S9-D is quite simple and straight forward. The two pins on each end of the wire allow electrical conductivity to take place between the two ends. When the pins are connected, the electrical current flows from the one end, through the wire, to the other end. This connection will remain in place unless the conductivity is interrupted or removed.

In addition to being used to connect two points, 0460121141-11-S9-D can be used in other ways as well. It is often used to provide a connection between two devices in a circuit, such as a power source and a load. It is also used to connect two parts of a circuit where the parts must be electrically insulated from each other, such as in the case of a wire junction box. This type of jumper wire is also used to create a jumper solenoid, which is used to start or stop a circuit on demand.

0460121141-11-S9-D is highly versatile and suitable for a wide range of applications. It is designed to be insulated against abrasion, chemical, and electrical effects, making it suitable for a variety of industrial, automotive, and electronic applications. In addition, the construction of the wire makes it both durable and easy to use, making it one of the more popular types of jumper wires.

The specific data is subject to PDF, and the above content is for reference