DP4RSC60D60B2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A contactor is an electrically-controlled switch used to control power distribution for various applications. It is mainly used in heavy load applications such as industrial machinery and in buildings as well. Contactors come in a variety of designs and sizes. The DP4RSC60D60B2 is a solid state contactor with a rated control current of 600A and a control voltage of 60V. In this article, we will discuss its application field and working principle.

The DP4RSC60D60B2 contactor is used mainly in applications such as motor control, light control, HVAC and home appliances. It is a single-phase contactor with a non-inductive current resistance of up to 60A, which can be used to control large loads. It is also highly reliable and energy efficient, making it suitable for applications that require long-term operation. The contactor has a rated working voltage of 600V and a switching frequency of 10KHz.

The DP4RSC60D60B2 contactor works by controlling the flow of electric current between two points. When the contactor is closed, electric current flows between the two points, thus allowing power to be transmitted from the power source to the load. When the contactor is open, the current is cut off and power transmission is stopped. The contactor is controlled by a relay or other type of actuator, which is activated by an external signal. This signal can be a mechanical switch or an electronic signal. The contactor can also be remotely controlled via an internet connection.

The working principle of the DP4RSC60D60B2 is based on the idea of two magnetic circuits. One of these circuits is the primary circuit and it provides the controlling voltage for the other circuit, which is the secondary circuit. The two circuits are connected through a pair of contact points. When the signal is activated, the contact points move the primary circuit’s magnetic field and induces an electromotive force (EMF) in the secondary circuit. This EMF turns on the load circuit, allowing power to be transmitted.

The DP4RSC60D60B2 contactor is suitable for a wide range of applications, thanks to its high current and voltage ratings, low power consumption and high reliability. Its working principle is also highly efficient and reliable. This makes it ideal for applications that require long-term operation, such as motor control, light control, HVAC and home appliances.

The specific data is subject to PDF, and the above content is for reference