B32529C0102J289 Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as metallized film capacitors, are capacitors that use film as an insulating material. The B32529C0102J289 is a metallized polycarbonate film capacitor that is compliant to RoHS standards. It is mainly used in various types of power applications including motor starting, in-rush current limiting circuits, EMI suppression, and DC to DC switching converters. It is also suitable for other DC circuit applications such as DC power supplies and solar inverters.

The B32529C0102J289 is a polarized capacitor, meaning that it has a positive and negative leads, and must be installed in the correct orientation. It has a voltage rating of 630VAC, a capacitance of 500VAC, an insulation resistance of at least 1000M, and a dielectric dissipation factor of 0.1%. The capacitance is expressed in microfarads (µF).

The working principle behind the B32529C0102J289 is quite simple. Electrodes on the two sides of the capacitor oxide film are electrically charged, causing a dielectric layer between them. An electrical current flows between the electrodes, and the charge accumulates on the dielectric layer. This results in a capacitance between the two electrodes. The capacitance value is dependent on the size of the dielectric layer and the voltage applied on the electrodes.

In addition to being used in power applications, the B32529C0102J289 can also be used for signal filtering and conditioning applications. It is well-suited for high-frequency, low-impedance conditioning and filtering applications. It can be used in low-voltage DC circuits, where it can provide a high level of filtering performance. It is also suitable for low-noise, low-identifier AC circuits, where it can provide a high-grade filtering performance.

In conclusion, the B32529C0102J289 is a metallized polycarbonate film capacitor that is designed for power and signal conditioning applications. It has a high insulation resistance and a dielectric dissipation factor of 0.1%. It is compliant to RoHS standards and can be used in a variety of DC and AC circuits. It is well-suited for high-frequency, low-impedance conditioning and filtering applications, as well as low-voltage DC circuits.

The specific data is subject to PDF, and the above content is for reference