1759907

Series:	COMBICON MSTB
Packaging:	Bulk
Part Status:	Active
Type:	Header, Male Pins, Shrouded (2 Side)
Number of Positions:	12
Positions Per Level:	12
Number of Levels:	1
Pitch:	0.200" (5.08mm)
Header Orientation:	90°, Right Angle
Plug Wire Entry:	--
Termination Style:	Solder
Mounting Type:	Through Hole
Current - IEC:	12A
Voltage - IEC:	250V
Wire Gauge or Range - AWG:	--
Wire Gauge or Range - mm²:	--
Color:	Black
Operating Temperature:	--
Contact Mating Finish:	Tin
Features:	--
Material Flammability Rating:	--
Ingress Protection:	--
Screw Size:	--
Torque - Screw:	--
Wire Strip Length:	--
Contact Material:	--
Housing Material:	--
Contact Tail Length:	0.138" (3.50mm)
Insulation Height:	0.339" (8.61mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Headers, Plugs and SocketsTerminal blocks, otherwise known as headers, plugs, and sockets are one of the most versatile and widely used components for electrical and electronic applications. They provide a secure connection between conductors, limiting loose connections and preventing wire damage. Terminal blocks come in many different configurations for various industrial applications. They can be employed for grounding, point-to-point wiring, bus bars, and power distribution.The most basic terminal blocks are typically constructed from molded plastic with two threaded male connections for attaching wires. They are used in a variety of applications including connecting wires to printed circuit boards, terminating two sets of wiring, or connecting multiple wires from a single source. When utilized in industrial applications, terminal blocks are used for a variety of purposes such as connecting and disconnecting power and signal lines. The terminal blocks can be mounted onto a board or panel, or fastened to a DIN rail. Wire termination is typically completed on the panel or DIN rail side of the assembly. Many products have additional accessories such as cable glands, strain relief clamps, and wire connectors that allow for easy and secure completion of the connection. The basic design of the terminal block consists of a base part made from a conductive material like metal or plastic. A top part usually has two contact pins, which make contact with the base part. It is very important that these pins are clean and straight so that the connection is secure and reliable.The 1759907 terminal block is a typical example of a generic terminal block. It has a common snap-in design and is a general purpose non-isolated terminal block for DIN-rail mounting. The block has an insulated back which blocks stray current from entering any other part of the system. The block features screw terminals to ensure a solid connection with the wires and the two positions permit connection of two wires at one time.Terminal blocks are also used for circuit protection, as they provide a safe and reliable link between two circuits. The block can help to prevent electrical surges or shorts from damaging sensitive signals and components. They also help to reduce thermal loss by allowing the heat generated within the circuit to be dissipated, leading to improved efficiency.Terminal blocks are not only used in industrial applications; they are also widely used in consumer applications, such as home and automotive applications. In many cases they are used for point to point wiring, and they also provide protection from short circuits and maintain power integrity.To conclude, terminal blocks, or headers, plugs and sockets, have a wide range of applications, from industrial to consumer. They are an important component in any electrical and electronic system, providing reliable connections between circuits and ensuring safety with their protective functions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description