ASTMHTA-50.000MHZ-AJ-E

Series:	ASTMHT
Packaging:	Strip
Part Status:	Active
Type:	MEMS (Silicon)
Frequency:	50MHz
Function:	Enable/Disable
Output:	LVCMOS
Voltage - Supply:	2.25 V ~ 3.63 V
Frequency Stability:	±20ppm
Operating Temperature:	-40°C ~ 125°C
Current - Supply (Max):	8mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Height - Seated (Max):	0.032" (0.80mm)
Current - Supply (Disable) (Max):	4.5mA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>Introduction</h2><p> Oscillators, the basic building blocks of all electronic and digital systems, are circuits that generate alternating current (AC) signals with accurately specified frequency and amplitude. ASTMHTA-50.000MHZ-AJ-E is a type of oscillator that can be used as a timebase in a variety of electronic systems. This type of oscillator is widely used in a variety of different applications, from electronics to telecommunications. In this article, we will discuss its application field and working principle.</p><h2>Application Field</h2><p>The ASTMHTA-50.000MHZ-AJ-E Oscillator is designed for a wide range of applications. It can be used in various fields such as telecommunications, measurement and control, medical and industrial electronics, automotive electronics, and aviation. In telecommunications, it is used as an important component in designing time division multiplexing systems. In the field of medical electronics, this type of oscillator is used in the design of patient monitors, such as pulse oximeters and blood pressure monitors. In the automotive field, it can be used for engine control, diagnostic systems, instrumentation, and intelligent motor control. In aviation, the oscillator can be used in GPS navigation, radar altimeters, or flight data recorders.</p><h2>Working Principle</h2><p>The ASTMHTA-50.000MHZ-AJ-E oscillator generates an AC signal with a frequency of 50 MHz. The signal is generated by a crystal resonator that is driven by a high-frequency oscillator circuit. The oscillator circuit is typically a voltage-controlled oscillator (VCO), which uses a voltage-controlled current source to control the frequency of the signal. The oscillator circuit then drives the crystal resonator, which generates the desired output frequency. The crystal resonator also acts as a filter, shaping the output frequency. The frequency of the signal can be adjusted by varying the voltage-controlled current source, allowing for precise control of the signal.</p><h2>Conclusion</h2><p>The ASTMHTA-50.000MHZ-AJ-E oscillator is a type of oscillator that can be used in a variety of applications. It is used in fields such as telecommunications, measurement and control, medical and industrial electronics, automotive electronics, and aviation. The oscillator generates an AC signal with a frequency of 50 MHz by using a crystal resonator driven by a high-frequency oscillator circuit. The frequency of the signal can be adjusted by varying the voltage-controlled current source, allowing for precise control.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description