ASTMHTD-25.000MHZ-AJ-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction to ASTMHTD-25.000MHZ-AJ-E Oscillators
• An oscillator is an electronic circuit capable of generating an AC or alternating current signal. The ASTMHTD-25.000MHZ-AJ-E Oscillators is a type of oscillator specifically designed for high frequency use.
• The circuit requires two components to produce the oscillating output; the oscillator itself, and a power source. The oscillator typically contains a quartz crystal, which vibrates at a set frequency in response to an electrical current being applied to it. This frequency is then used to generate the alternating signal.
• Application Field
• The ASTMHTD-25.000MHZ-AJ-E Oscillator is commonly used in a wide range of applications, including telecommunications, radio broadcasting, radar, navigation, sensor technology, medical imaging, and instrumentation. Additionally, the oscillator can be used in electrical equipment for various synchronization purposes.
• The ASTMHTD-25.000MHZ-AJ-E Oscillator has been widely adopted for high-speed applications due to its wide frequency range, low power consumption, and overall accuracy.
• For example, the oscillator is often used in mobile phones where it is used to generate the frequencies required to transmit and receive voice and data, in GPS systems to generate the precise timing signals needed for navigation and precise location, and in radio communications to accurately tune the frequency.
• Working Principle
• In order to generate an alternating current using the ASTMHTD-25.000MHZ-AJ-E Oscillator, a voltage is applied to a quartz crystal, which then vibrates at a frequency determined by its physical characteristics. The oscillator then amplifies the signal until it is at an acceptable level for application.
• The ASTMHTD-25.000MHZ-AJ-E Oscillator also works to reduce interference caused by outside sources. This is accomplished by generating and maintaining an output signal that is much faster than the external noise; thus, the oscillator can ignore such interference and maintain a constant frequency of oscillation.

The specific data is subject to PDF, and the above content is for reference