1733547

Series:	COMBICON MVSTBW
Packaging:	Bulk
Part Status:	Active
Type:	Plug, Female Sockets
Number of Positions:	5
Positions Per Level:	5
Number of Levels:	1
Pitch:	0.197" (5.00mm)
Header Orientation:	--
Plug Wire Entry:	270°
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Mounting Type:	Free Hanging (In-Line)
Current - IEC:	12A
Voltage - IEC:	250V
Wire Gauge or Range - AWG:	12-30 AWG
Wire Gauge or Range - mm²:	0.2-2.5mm²
Color:	Black
Operating Temperature:	--
Contact Mating Finish:	Tin
Features:	Mating Flange, Retention Latches (Non-Wire Side)
Material Flammability Rating:	--
Ingress Protection:	--
Screw Size:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Wire Strip Length:	7mm
Contact Material:	--
Housing Material:	--
Contact Tail Length:	--
Insulation Height:	1.024" (26.01mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets are widely used in industrial applications. They serve as a connection point between two or more electrical devices, such as motors, controllers, drivers, and other electrical devices. They are commonly used to connect wires, cables and other conductors onto electrical equipment, and to provide power, signal, or data connections between components in an electrical system. Terminal Blocks come in many sizes, shapes, and configurations to meet a variety of needs.
The 1733547 Terminal Block is a standard terminal block typically used for electrical connections. It is a two-piece device that features a header and a plug. The header is a rectangular block with a groove that runs along the length of it. This groove is used to insert a plug with contacts that can be used to make an electrical connection. The plug is a small cylindrical connector with two opposing ends inserted into the groove on the header. When a pressure is applied to the two ends of the plug, it forms an electrical connection that allows signals, power, or data to travel between the two electrodes on the plug.
The 1733547 Terminal Block is typically used to make a direct connection between two components on a circuit board. This is accomplished by pressing two pins into the two ends of the plug. The pin in the header is also connected to the component for which it was designed. The two pins make direct contact with each other, allowing the component to receive the desired signal or power. This type of connection is often used in the development of circuit boards.
The working principle of the 1733547 Terminal Block is simple. When the pins are pressed into the two ends of the plug, an electrical connection is formed. This connection is then used to transmit signals, power, or data between the two components. This type of connection is very reliable and can handle a wide range of current and voltage. It is also very easy to use and requires little maintenance.
The 1733547 Terminal Block is a versatile and popular electrical connection device. It is especially useful in situations where a reliable and direct connection is needed between two components. This type of device is commonly used in industrial applications and circuit board development. It is a reliable and easy to use device that can handle signals, power, or data transmission between two components without much maintenance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description