Allicdata Part #: | 124-41-304-41-002000-ND |
Manufacturer Part#: |
124-41-304-41-002000 |
Price: | $ 5.48 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Mill-Max Manufacturing Corp. |
Short Description: | CONN IC SKT DBL |
More Detail: | N/A |
DataSheet: | 124-41-304-41-002000 Datasheet/PDF |
Quantity: | 1000 |
102 +: | $ 4.98367 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
122-41-304-41-002 is a socket set consisting of IC (integrated circuit), a transistor, and a socket connector. This type of socket set is commonly used in electronics, used to connect all the chips and components of the circuit board. The socket is usually made of a metal or plastic frame and designed to fit and interlock with the circuit board type. It is also designed for signal, power, and ground connections between integrated circuits and complementary components.
The main purpose of using socketed electronics is to enable proper electrical fastening with minimized contact resistance. Moreover, the connectors reduce installation time and cost as compared to simple soldering. This makes sockets a preferable option to secure the ICs and transistors from circuit boards tight. The socket systems are more reliable than soldered connections since they are much less likely to fail due to wear, temperature changes and vibration.
The working principle of a socket set consists fundamentally of a set of contact pins and a plastic housing. The IC or transistor sits in the plastic housing, and the contact pins connect through the legs of the integrated circuit to the circuit board. Connections between the inserted core and the circuit board are enabled when the contact spring presses against a corresponding contact point. These connections can be either positive, negative or ground. The modern sockets come in a variety of sizes and styles such as dual in-line package (DIP) sockets, plastic leaded chip carrier (PLCC) sockets, and quad flat package (QFP) sockets which are frequently used for IC and transistors.
The sockets are also widely used in other electrical components such as capacitors, resistors, and diodes. In order to reduce noise, radio frequency interference (RFI) and electromagnetic interference (EMI) are also eliminated as much as possible. That is why the connection between the socket and the other electronic components is done by a special anti-EMI and anti-RFI contact spring.
In short, the 122-41-304-41-002 socket set for ICs, transistors, and other digital components plays a significant role in the assembly of integrated circuit boards. With the use of this socket set, a complete electrical connection of the circuit boards to the ICs and other electronic components is ensured to its fullest extent.
The specific data is subject to PDF, and the above content is for reference
CONN SOCKET PGA GOLD
CONN IC DIP SOCKET ZIF 28POS TIN
CONNECTOR
CONN SOCKET LGA 1356LGA GOLD
CONN CAMERA SOCKET 32POS GOLD
CONN SOCKET TRANSIST TO-5 4POS