220MXG820MEFC35X25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, such as the 220MXG820MEFC35X25, are important components in electronic products and are widely used in markets like computers and consumer electronics products. They are constructed from rolled foil and an electrolyte solution. The 220MXG820MEFC35X25 has a capacitance of 2200 µF and a voltage rating of 350 VDC. It is a general-purpose capacitor suitable for use in a wide variety of applications.

The basic working principle of an aluminum electrolytic capacitor is simple and it involves two aluminum foil electrodes separated by an electrolyte and paper spacer. The foil electrodes have a thin oxide layer, which acts as a dielectric layer, and the electrolyte absorbs electrical charges. When a voltage is applied across the device, an electric current flows between the electrodes, causing charges to be stored on either side and creating a capacitance. As a result, the voltage difference that can be stored between the two electrodes increases as the capacitance increases.

The aluminum electrolytic capacitor is mainly used in DC blocking, filtering, bypass and decoupling applications. In DC blocking applications, the capacitor provides a low-impedance path for DC signals while blocking AC signals. This makes it ideal for preventing AC signals from interfering with sensitive DC circuits. In filtering applications, the capacitor is used to block high frequencies which can cause undesirable effects in the circuit. In bypass and decoupling applications, the capacitor is used to bypass power supply noise and provide a ground reference for a signal circuit.

The 220MXG820MEFC35X25 aluminum electrolytic capacitor is designed for use in high temperature applications. It has a temperature rating of 85°C and a maximum reflow temperature of 210°C. It is also designed to provide long-term reliability, with a rated lifetime of 2000 hours at 105°C. This makes it an ideal choice for a wide range of industrial and automotive applications.

In summary, the 220MXG820MEFC35X25 aluminum electrolytic capacitor is an ideal choice for a wide range of applications. It is designed for use in high temperature applications, with a rated lifetime of 2000 hours at 105°C. It is mainly used in DC blocking, filtering, bypass and decoupling applications, and it provides a low-impedance path for DC signals while blocking AC signals. The working principle of the device involves two aluminum foil electrodes separated by an electrolyte, which creates a capacitor when a voltage is applied across the device.

The specific data is subject to PDF, and the above content is for reference