ARJM11C7-007-NN-CW2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Modular Connectors - Jacks With Magnetics, such as the ARJM11C7-007-NN-CW2, are electrically active connectors used in a variety of electronic applications .

They are found in a variety of electronic mechanical devices, such as telecommunications and industrial equipment, and may be used in a variety of applications including data transmission, signal processing, and power supply switching.

The fundamental principle of operation behind all Jacks With Magnetics is the same . The connector consists of two main components, an electromechanical device and a magnetic field, which interact to reduce the impact of EMI or RFI interference.

The electromechanical device contains two metal terminals, which create a gap or "Field of Influence" separated by a spring loaded plunger. When a signal is sent through the device, the metal terminals deflect, and the air gap between the contacts closes. This creates the magnetic field, which can be used to reduce the damaging effects of EMI or RFI interference.

The ARJM11C7-007-NN-CW2 is a two-piece connector, comprised of a male header and a female contact. The male header is often referred to as the "mail slide" and contains the two metal terminals. The female contact is connected to the rest of the circuit, and provides a connection port for the input signals.

When a signal is sent from the host device to the connector, the male header and female contact form an impedance-matched pair, which is designed to reduce the unwanted effects of EMI and RFI. This ensures that the signal traveling through the connection is not interfered by unwanted noise and distortion.

These connectors are commonly used in telecoms, industrial equipment, security and sensing equipment, and a variety of other electronic applications, such as automotive and consumer electronics. They are designed to work in a wide range of temperatures and environmental conditions, and can handle a wide variety of signals, from analog to digital.

In addition to the reduction of EMI and RFI, Jacks With Magnetics, like the ARJM11C7-007-NN-CW2, also offer other benefits. For example, they offer greater signal integrity and robustness, as well as protection against corrosion and other environmental factors. This ensures that the signal remains consistent over time and unaffected by the conditions of the environment.

In conclusion, the ARJM11C7-007-NN-CW2, and other Jacks With Magnetics, are widely used in a variety of electronic applications, thanks to their ability to reduce EMI and RFI interference, increased signal integrity, and robustness.

The specific data is subject to PDF, and the above content is for reference