QTE-060-10-H-D-K

Packaging:	Bulk
Part Status:	Active
Connector Type:	Header, Outer Shroud Contacts
Number of Positions:	120
Pitch:	0.031" (0.80mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Ground Bus (Plane), Pick and Place
Contact Finish:	Gold
Contact Finish Thickness:	30.0µin (0.76µm)
Mated Stacking Heights:	--
Height Above Board:	0.566" (14.37mm)
Series:	Q Strip® QTE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board)Rectangular connectors - arrays, edge type, mezzanine (board to board) are a type of electrical connector made up of a rectangular array of pins or contacts that interconnect two boards. The size of the array allows the connector to provide a robust connection, while the electrical mechanisms of the array allow for high-speed data transfer over a wide bandwidth. In addition, they can be designed for ease of use and maintenance, and they are often used in demanding applications in harsh environments.One type of rectangular connector - arrays, edge type, mezzanine (board to board) is the QTE-060-10-H-D-K. This is a ruggedized board-to-board connector system that is designed for high-reliability connection and measurement of up to 10 differential or single-ended signals within a slim housing profile. It has an RS-232 interface for serial communications with up to 645 Mbps (bits per second) data throughput, and its design provides EMI/RFI suppression, while also meeting IP67 water and dust ingress protection standards.The application field of the QTE-060-10-H-D-K is varied and numerous, although it is particularly useful in machine to machine communications, as well as in telecommunications and industrial applications. It is mainly used in applications where a robust connection is needed and sufficient data throughput is required to accommodate a high-speed data signal. These include power and energy applications, avionics, medical imaging, and instrumentation. The working principle of the QTE-060-10-H-D-K consists of a spring-loaded contact that runs along the back side of the array. This contact is designed to make a secure electrical contact with the mating terminal when the two halves are mated. The connection is made when the terminal is pressed into the connector body and the contact is compressed, forming a positive electrical connection. This system provides an extremely low contact resistance for a reliable connection. The QTE-060-10-H-D-K also has a locking mechanism which is perfect for applications where a high-reliability connection is necessary. This is done by using a combination of machined notches to secure a latch against the mating side of the array. When mated, the latching factor prevents any loosening of the connection, creating a strong and reliable connection without any play.The QTE-060-10-H-D-K is designed to meet relevant industry standards such as UL and IEC 60529 for rating degress of protection against environmental conditions, and MIL-STD-202 for temperature and humidity resistance. It is also designed to meet shock and vibration requirements when installed in panel mount systems.To summarize, the QTE-060-10-H-D-K is a ruggedized board-to-board connector system used for reliable connection and measurement of up to 10 differential or single-ended signals within a slim housing profile. Its application field is varied and numerous, mainly used in applications where a robust connection and high data throughput is needed. The working principle of the QTE-060-10-H-D-K consists of a spring-loaded contact that runs along the back side of the array, and a locking mechanism for reliable connection. It is designed to meet relevant industry standards such as UL and IEC 60529, MIL-STD-202, and shock and vibration requirements when installed in panel mount systems.

The specific data is subject to PDF, and the above content is for reference