579R128IAT Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used in a variety of applications to produce a range of periodic waveforms, including sinusoidal, square, and sawtooth. 579R128IAT is a type of programmable oscillator that can be programmed for a specific frequency or output waveform using programmable software. The input and output signals are digital, meaning that they can accommodate a wide variety of waveforms. Additionally, this type of oscillator is particularly resilient to noise because the internal components are not affected by changes in temperature, pressure, or humidity.

The 579R128IAT utilizes a Field Programmable Gate Array (FPGA) to generate the desired output waveforms. FPGAs are highly reliable and relatively inexpensive, making them a versatile platform for custom circuit designs. The FPGA consists of a series of digital logic gates that are programmable to produce a variety of waveforms. In the case of the 579R128IAT, the user can select the desired output frequency and waveform to be generated by the FPGA.

In addition to the FPGA, the 579R128IAT also includes a system clock, which is used to control the operations of the oscillator. The system clock is responsible for timing the output of the oscillator, ensuring that the output waveform is accurate and consistent. Additionally, the system clock also provides a source of synchronization for the FPGA, so that all of its components are operating at the same rate.

The 579R128IAT is capable of producing output frequencies ranging from 1 Hz to 100MHz. This range is suitable for many applications, such as frequency synthesisers, signal generation and conditioning, timing synchronization, test and measurement equipment, communications systems, satellite transponders, and other radio frequency (RF) applications. Additionally, the 579R128IAT is capable of producing a wide variety of waveforms, including sinusoidal, square, and sawtooth waveforms, allowing for greater flexibility in custom system designs.

The 579R128IAT is a fully programmable oscillator, and its programming can be carried out using a simple graphical user interface. This allows the user to easily input their desired parameters, including the output frequency, output waveform, and clock speed. The user can also experiment with different combinations of parameters to achieve their desired output waveform, as the parameters can be adjusted and the output waveforms can be previewed before they are applied. This makes the 579R128IAT an ideal choice for applications that require customized output waveforms.

In conclusion, the 579R128IAT is a highly flexible programmable oscillator that is capable of producing a wide range of output frequencies and waveforms. Its FPGA-based architecture ensures reliability and cost-effectiveness, while its graphical user interface makes it easy to program the oscillator for specific applications. As a result, the 579R128IAT is suitable for a variety of applications, ranging from frequency synthesisers, to signal generation and conditioning, to test and measurement equipment. This makes it an ideal choice for any custom circuit design.

The specific data is subject to PDF, and the above content is for reference