ATS-FM-M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flow sensors measure the volumetric or mass flow rate of a liquid or a gas. ATS-FM-M flow sensors, which are miniature flow sensors, use a advanced thermal technology and a mechanical design to accurately measure the flow rate or direction of a fluid. The following is a brief overview of the application fields and working principle of ATS-FM-M flow sensors.

Application Fields

ATS-FM-M flow sensors are commonly used in a variety of applications, including industrial, medical, analytical and consumer device markets. They are typically used to measure the flow rate of cooling fluids in industrial processes. In addition, they are widely used in medical instruments, such as nebulizers and respirators, to measure the flow of air or other gases. ATS-FM-M flow sensors are also used in analytical equipment to measure the flow rate or direction of fluid mixtures. Furthermore, the sensors can be used in consumer electronic devices to monitor the performance of fans and other air flow related components.

Working Principle

The ATS-FM-M flow sensor is based on a thermal technology and a mechanical design. Its working principle involves measuring the time it takes for a heated element to cool down after being exposed to a flowing gas or liquid. The time taken to cool down is directly proportional to the mass flow rate of the air or fluid passing over the heated element.

When a fluid is passed over the ATS-FM-M flow sensor, the heater on the sensor will transfer its heat to the fluid, causing the temperature of the fluid to increase and the temperature of the heater to decrease. The temperature change of the heater induces an electrical signal in the circuit, which is proportional to the flow rate of the fluid. The heated section is designed to be sensitive to certain ranges of flow rate and airspeed, allowing it to be used for a variety of applications.

The ATS-FM-M flow sensor is made up of three main parts: a heating element, a pressure sensing element and a signal processing circuit. The heating element is usually made of ceramic or metal and is intended to be in direct contact with the flowing gas or liquid. The pressure sensing element is designed to detect changes in pressure induced by the flow of the fluid. The signal processing circuit processes the electrical signals generated by the pressure sensors and converts them into a flow rate or direction.

Overall, ATS-FM-M flow sensors are miniature, low-cost and reliable flow sensors that are used in a variety of fields such as industrial process, medical, analytical, and consumer electronics. They use a thermal technology and a mechanical design to measure the flow rate or direction of a fluid accurately and reliably.

The specific data is subject to PDF, and the above content is for reference