Allicdata Part #: | ATS2234-ND |
Manufacturer Part#: |
ATS-FM-44 |
Price: | $ 62.21 |
Product Category: | Sensors, Transducers |
Manufacturer: | Advanced Thermal Solutions Inc. |
Short Description: | LCD DISPLAY FLOW TOTALIZER AND F |
More Detail: | Liquid Flow Sensor 1.5 ~ 25 LPM Male, 1/2", 0.5" (... |
DataSheet: | ATS-FM-44 Datasheet/PDF |
Quantity: | 8 |
1 +: | $ 56.54880 |
5 +: | $ 53.72140 |
10 +: | $ 49.48020 |
25 +: | $ 43.82530 |
50 +: | $ 42.41160 |
100 +: | $ 40.99790 |
Series: | ATS |
Part Status: | Active |
Sensing Range: | 1.5 ~ 25 LPM |
Flow Sensor Type: | Liquid |
Voltage - Input: | -- |
Port Size: | Male, 1/2", 0.5" (12.7mm) BSP |
Switch Function/Rating: | -- |
Material - Body: | Acetal Copolymer |
Operating Temperature: | 0°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Flow sensors are devices designed to measure the rate of fluid passing through a system. Flow sensors can be used in a variety of applications, including industrial process control, building automation, consumer product testing, and medical diagnostics. One type of flow sensor is the ATS-FM-44, which is used to measure fluid flow rates in a variety of industries. This article will discuss the application field and working principle of the ATS-FM-44 flow sensor.
Application Field of the ATS-FM-44
The ATS-FM-44 flow sensor is a multi-point water flow meter designed for industrial applications, particularly for controlling the flow of water in industrial water treatment systems. The ATS-FM-44 is capable of accurately measuring flow rates from 0.25 to 15 gpm (1 to 60 lpm). The device can be used to monitor water treatment systems, such as chemical or biological oxidant treatment, or to measure industrial process fluids such as cooling water, oil, fuel, and chemical solutions.
Working Principle of the ATS-FM-44
The ATS-FM-44 flow sensor uses a design that is based on the Bernoulli Principle, which states that when a fluid flows in a tube, the pressure of the fluid at any point along the flow is proportional to its velocity. This principle is utilized in the construction of the ATS-FM-44, which uses a specially designed flow tube that includes a series of small openings. As the fluid enters the tube, the pressure of the fluid increases and the openings create a pressure differential that is proportional to the flow rate of the fluid. This differential pressure is translated into an electrical signal which is then used to generate a flow rate measurement.
Conclusion
The ATS-FM-44 flow sensor is a highly accurate device that can be used in a variety of industrial applications. The device utilizes the Bernoulli Principle to accurately measure fluid flow rates, and is capable of measuring flow rates from 0.25 to 15 gpm (1 to 60 lpm). This makes it well suited for monitoring water treatment systems, as well as industrial process fluids such as oil, fuel, and chemical solutions.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...