SCA100T-D02-1 Sensors, Transducers

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Motion sensors have become an indispensable part of modern life. They are used in a wide variety of applications ranging from consumer products to industrial control systems. The SCA100T-D02-1 is a type of motion sensor that belongs to the category of inclinometers. Inclinometers are used in applications requiring measurements of objects in two dimensions, such as angles of rotation or inclination.

When purchasing an SCA100T-D02-1, the customer will be provided with a digital output sensor accompanied by an analog output version. Both are similar in design and have a resolution of 0.1 degree in both directions. The digital output version uses an I2C interface to communicate with the controlling device, while the analog version outputs a voltage which can be read with an analog-to-digital converter.

The SCA100T-D02-1 consists of two MEMS accelerometer elements, a fixed range two-dimensional tilt sensing element combined with a single-axis angle sensing element. This combination allows the device to measure the tilt angle and the rotation angle of the object. The internal mechanism is based on a “torture gimbal” structure, consisting of two masses which are attached to a common frame by two pivot points. The movement of the masses in response to the external force is measured by capacitive MEMS accelerometer elements.

The tilt angle can be measured in two different ways. The first is based on the capacitive sensing elements and the second is based on a mechanical contact between two “fingers”. The mechanical contact method is accurate up to ±0.02 degree, which is more accurate than the capacitive sensing method. The sensor also features a free-fall detection feature, which can be used to detect the movement of the object in case of an impact.

In order to use an SCA100T-D02-1, the device needs to be connected to the controlling device. For this purpose, a 10-pin connector is provided, which allows the connecting cables to be connected to the appropriate pins. The upper 3 pins are used for the “fine trace” output and the lower 7 for the analog output. Once the device is connected, the output can be read using the appropriate commands. This output can be used to control any type of device that requires the measurement of an object’s tilt angle or rotation.

In conclusion, the SCA100T-D02-1 is a type of motion sensor designed to measure the tilt angle and rotation angle of an object. It works by using a combination of capacitive sensing elements and a mechanical contact method. It is intended for applications which require accurate measurements and it is provided with a 10-pin connector for connecting to the controlling device. It is suitable for any type of device that requires the measurement of the tilting angle or rotation angle of an object.

The specific data is subject to PDF, and the above content is for reference