ERJ-2GE0R00X Allicdata Electronics

ERJ-2GE0R00X Resistors

Allicdata Part #:

P0.0JTR-ND

Manufacturer Part#:

ERJ-2GE0R00X

Price: $ 0.00
Product Category:

Resistors

Manufacturer: Panasonic Electronic Components
Short Description: RES SMD 0 OHM JUMPER 1/10W 0402
More Detail: 0 Ohms Jumper 0.1W, 1/10W Chip Resistor 0402 (1005...
DataSheet: ERJ-2GE0R00X datasheetERJ-2GE0R00X Datasheet/PDF
Quantity: 2750000
10000 +: $ 0.00171
30000 +: $ 0.00151
50000 +: $ 0.00138
100000 +: $ 0.00135
Stock 2750000Can Ship Immediately
$ 0
Specifications
Series: ERJ
Packaging: Tape & Reel (TR) 
Part Status: Active
Resistance: 0 Ohms
Tolerance: Jumper
Power (Watts): 0.1W, 1/10W
Composition: Thick Film
Features: Automotive AEC-Q200
Temperature Coefficient: --
Operating Temperature: -55°C ~ 155°C
Package / Case: 0402 (1005 Metric)
Supplier Device Package: 0402
Size / Dimension: 0.039" L x 0.020" W (1.00mm x 0.50mm)
Height - Seated (Max): 0.016" (0.40mm)
Number of Terminations: 2
Failure Rate: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chip Resistor - Surface Mount

The ERJ-2GE0R00X is a chip resistor that is made for surface mount applications. This type of chip resistor is an ideal choice for applications where size and space are a factor. The ERJ-2GE0R00X has a small footprint and is able to withstand temperatures up to 125°C.

The ERJ-2GE0R00X can be used in a wide variety of applications. It can be used to reduce current surges and dissipate power from other electrical components, as well as stabilize voltage. It can also be used as a filter in audio and in automotive electronic control units. The ERJ-2GE0R00X can also provide a high level of accuracy in measurement applications, as it has tight tolerances.

The ERJ-2GE0R00X works on the principle of Ohm’s law. This law states that the voltage (V) across a resistor is equal to the current (I), multiplied by the resistance (R). As the voltage and current increase, so does the heat produced by the resistor. This heat energy must be dissipated in order for the resistor to function properly and to prevent any damage from occurring. This can be accomplished by using a heat sink or by forcing air through the resistors.

The ERJ-2GE

The specific data is subject to PDF, and the above content is for reference

Latest Products
ERA-2AEB4990X

RES SMD 499 OHM 0.1% 1/16W 0402499 Ohms ...

ERA-2AEB4990X Allicdata Electronics
ERA-2AEB513X

RES SMD 51K OHM 0.1% 1/16W 040251 kOhms ...

ERA-2AEB513X Allicdata Electronics
ERA-2AEB472X

RES SMD 4.7K OHM 0.1% 1/16W 04024.7 kOhm...

ERA-2AEB472X Allicdata Electronics
ERA-2AEB49R9X

RES SMD 49.9 OHM 0.1% 1/16W 040249.9 Ohm...

ERA-2AEB49R9X Allicdata Electronics
ERA-2AEB203X

RES SMD 20K OHM 0.1% 1/16W 040220 kOhms ...

ERA-2AEB203X Allicdata Electronics
ERA-2AEB302X

RES SMD 3K OHM 0.1% 1/16W 04023 kOhms 0....

ERA-2AEB302X Allicdata Electronics