Allicdata Part #: | 1027-1002-ND |
Manufacturer Part#: |
30-73258 |
Price: | $ 8.60 |
Product Category: | Sensors, Transducers |
Manufacturer: | Interlink Electronics |
Short Description: | SENSOR FORCE RES 0.04-4.5LBS |
More Detail: | Resistive Sensor 20gf ~ 2.0kgf (0.04lbs ~ 4.5lbs) |
DataSheet: | 30-73258 Datasheet/PDF |
Quantity: | 1276 |
1 +: | $ 7.81200 |
5 +: | $ 7.65072 |
10 +: | $ 6.37560 |
25 +: | $ 5.89756 |
50 +: | $ 5.73804 |
100 +: | $ 4.94109 |
500 +: | $ 4.62231 |
1000 +: | $ 4.38322 |
Series: | FSR™400 |
Part Status: | Active |
Sensor Type: | Resistive |
Response Time: | 3µs |
Output Type: | Analog |
Termination Style: | Solder Tab |
Voltage - Supply: | -- |
Operating Temperature: | -40°C ~ 85°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
Touch sensors are an important category of sensing elements widely used for interaction with mobile and embedded applications. They play a vital role in the development of robot systems, interactive games, industrial controls, automotive components, and other complex applications. One of the most important types of touch sensors is the 30-73258, which has a wide range of applications and working principles.
Application Field
The 30-73258 touch sensor is mainly used in the motion detection field, where it can measure relative speed changes between two items. This type of touch sensor uses an oscillator to detect motion between two points, and the increased resistance generated by the oscillator is used to detect motion. It can be used in a wide range of applications, such as robotics, industrial controls, automotive components, and gaming systems.
Working Principle
The 30-73258 touch sensor works on the same principle as a piezoelectric sensor. When a force is applied to the touch surface, the applied force is converted into mechanical strain energy. This mechanical energy is then converted into electrical energy through an oscillator, which is known as the piezoelectric effect. The electrical signal generated by the oscillator is used to detect motion between two points.
Furthermore, the 30–73258 touch sensor uses a strain gauge to measure changes in resistance. When a force is applied to the touch surface, the strain gauge will experience a change in its electrical resistance. This change is used to detect motion between two points. The strain gauge is used to measure the minimal change in resistance when a force is applied to the touch surface and can detect even the slightest movement.
Conclusion
The 30-73258 touch sensor is a widely used type of touch sensor due to its ability to detect motion. The touch sensor works on the same principle as a piezoelectric sensor and uses a strain gauge to measure changes in resistance. Its wide range of applications makes it an ideal choice for motion detection, robotics, industrial controls, automotive components, and gaming systems.
The specific data is subject to PDF, and the above content is for reference
TOUCH SENSOR M10 P10DB-10
USB MICRO MODULE GRAY
VERSAPAD USB - 8-PIN HEADER
BARE CONDUCTIVE PRINTED SENSORS
SENSOR FORCE RES 0.04-4.5LBS
INFRARED TOUCH SENSOR