HAL 400-S Sensors, Transducers |
|
Allicdata Part #: | 398-1101-ND |
Manufacturer Part#: |
HAL 400-S |
Price: | $ 55.72 |
Product Category: | Sensors, Transducers |
Manufacturer: | LEM USA Inc. |
Short Description: | SENSOR CURRENT HALL 400A AC/DC |
More Detail: | Current Sensor 400A 1 Channel Hall Effect, Open Lo... |
DataSheet: | HAL 400-S Datasheet/PDF |
Quantity: | 38 |
1 +: | $ 50.65200 |
5 +: | $ 48.11940 |
10 +: | $ 44.32050 |
25 +: | $ 39.25530 |
50 +: | $ 37.98900 |
100 +: | $ 36.72270 |
Series: | HAL |
Packaging: | Bulk |
Part Status: | Active |
For Measuring: | AC/DC |
Sensor Type: | Hall Effect, Open Loop |
Current - Sensing: | 400A |
Number of Channels: | 1 |
Output: | Ratiometric, Voltage |
Sensitivity: | -- |
Frequency: | DC ~ 50kHz |
Linearity: | ±0.5% |
Accuracy: | ±1% |
Voltage - Supply: | ±15V |
Response Time: | 3µs |
Current - Supply (Max): | 25mA |
Operating Temperature: | -25°C ~ 85°C |
Polarization: | Bidirectional |
Mounting Type: | Panel Mount |
Package / Case: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HAL 400-S is a current transducer which functions by measuring the current flow and converting it into a proportional electrical signal which can be read and interpreted by an electronic device such as a computer or a data logger. It is typically found in industrial, military, and energy applications.
The basic working principle of the HAL 400-S is based on Faraday\'s Law of Electromagnetic Induction, which states that the magnitude of induced EMF in a circuit is proportional to the rate of change of the magnetic flux linked with it. The transducer works by applying the current to be measured through a primary coil, which then passes through a secondary coil. This current-induced magnetic field is detected by the secondary coil, which uses an internal signal amplifier to convert the current into an electrical signal.
In addition to the fundamental operating principle, the HAL 400-S also utilises several sophisticated signal-processing technologies which allow for precise and accurate measurements in a variety of applications. For instance, the device uses Proportional-to-Absolute (P2A) transducers which convert a linear input current into an accurate absolute measurement of the current, and Low Pass Filtering (LPF) which helps to reduce the amount of noise introduced by the measurement process.
The HAL 400-S current transducer is an ideal choice for a wide range of applications, including electric power measurement, military and aerospace applications, and industrial control. Its high accuracy and exceptional signal-processing capabilities make it suitable for use in both industrial settings and in harsh environments which require reliable and accurate current measurements.
The HAL 400-S current transducer is capable of measuring currents ranging from a few amperes to a maximum of 1000A, at frequencies of between 1Hz and 150kHz. It is also capable of producing accurate readings for DC, AC, or mixed AC/DC signals, and is suitable for use in both low and high voltage applications. Furthermore, the device offers a wide range of output signals, including voltage, current, frequency, amplitude, and pulse rate.
Moreover, the HAL 400-S offers an impressive degree of reliability and performance, making it a popular choice in industrial and military applications. The device is resistant to changes in ambient temperature, vibration, and other adverse conditions, and is designed to operate reliably even under extreme operating conditions. Additionally, the device is extremely easy to install and configure, allowing for a quick and efficient implementation.
Overall, the HAL 400-S current transducer is an ideal choice for a wide range of applications, thanks to its exceptional accuracy and signal processing capabilities. It is highly reliable and easy to install, and is suitable for use in both industrial and harsh environments. Its wide range of output signals makes it an excellent choice for a variety of different applications, from electric power measurement to military and aerospace applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PTC-04-DB-HALL06 | Melexis Tech... | 226.06 $ | 1000 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL01 | Melexis Tech... | 99.93 $ | 2 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL02 | Melexis Tech... | 99.93 $ | 3 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL05 | Melexis Tech... | 99.93 $ | 28 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL03 | Melexis Tech... | 99.93 $ | 4 | PTC04 DAUGHTERBOARD HALL0... |
HALF12T | TDK-Lambda A... | 18.2 $ | 132 | HEATSINK PFE500F WIDTH 1.... |
HALL-ADAPTER-EVM | Texas Instru... | 7.2 $ | 25 | SOT23 TO92 HALL SENSOR BA... |
HAL USB PROGRAMMER TOOL V.1.0 | TDK-Micronas... | 83.16 $ | 59 | BOARD USB PROGRAMMER HALL... |
HAL APV V5.1 | TDK-Micronas... | 399.17 $ | 56 | BOARD PROGRAMR HAL8 HAL10... |
LM4835MTX/HALF | Texas Instru... | 0.0 $ | 1000 | IC AMP AUDIO PWR 2.2W AB ... |
HAL1821UA-A | TDK-Micronas... | 0.73 $ | 1000 | SENSOR LINEAR ANALOG TO92... |
HAL101JQ-I | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL APB V1.5 | TDK-Micronas... | 0.0 $ | 1000 | BOARD PROGRAMMER APB V1.5... |
TL1220R1BBBYB-HALO | E-Switch | 2.93 $ | 1000 | SWITCH TACTILE SPST-NO 0.... |
TL1220R1BBBRG-HALO | E-Switch | 2.3 $ | 1000 | SWITCH TACTILE SPST-NO 0.... |
HAL 100-S | LEM USA Inc. | 52.19 $ | 9 | SENSOR CURRENT HALL 100A ... |
HAL 400-S | LEM USA Inc. | 55.72 $ | 38 | SENSOR CURRENT HALL 400A ... |
HAL 600-S | LEM USA Inc. | 55.72 $ | 25 | SENSOR CURRENT HALL 600A ... |
HAL 50-S | LEM USA Inc. | 39.14 $ | 1000 | SENSOR CURRENT HALL 50A A... |
HAL 200-S | LEM USA Inc. | 39.14 $ | 1000 | SENSOR CURRENT HALL 200A ... |
HAL 300-S | LEM USA Inc. | 41.79 $ | 1000 | SENSOR CURRENT HALL 300A ... |
HAL 500-S | LEM USA Inc. | 41.79 $ | 1000 | SENSOR CURRENT HALL 500A ... |
HAL 50-S/SP1 | LEM USA Inc. | 63.78 $ | 1000 | SENSOR CURRENT HALL 50A A... |
HAL503S-E | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH LATCH SOT... |
HAL101JQ-C | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL107JQ-C | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL107JQ-I | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL SO... |
HAL201JQ-K | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL206JQ-K | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...