Allicdata Part #: | HAL50-S/SP1-ND |
Manufacturer Part#: |
HAL 50-S/SP1 |
Price: | $ 63.78 |
Product Category: | Sensors, Transducers |
Manufacturer: | LEM USA Inc. |
Short Description: | SENSOR CURRENT HALL 50A AC/DC |
More Detail: | Current Sensor 50A 1 Channel Hall Effect, Open Loo... |
DataSheet: | HAL 50-S/SP1 Datasheet/PDF |
Quantity: | 1000 |
25 +: | $ 57.97590 |
Series: | HAL |
Packaging: | Bulk |
Part Status: | Active |
For Measuring: | AC/DC |
Sensor Type: | Hall Effect, Open Loop |
Current - Sensing: | 50A |
Number of Channels: | 1 |
Output: | Ratiometric, Voltage |
Sensitivity: | -- |
Frequency: | DC ~ 50kHz |
Linearity: | ±0.5% |
Accuracy: | ±1% |
Voltage - Supply: | ±15V |
Response Time: | 3µs |
Current - Supply (Max): | 25mA |
Operating Temperature: | -25°C ~ 85°C |
Polarization: | Bidirectional |
Mounting Type: | Chassis Mount |
Package / Case: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HAL 50-S/SP1 product line is a current transducer manufactured by Hacco, a leading manufacturer of transducers and accessories. This product line is designed to measure currents ranging from 1 A to 2 A. It is ideal for control applications, monitoring, and measurement of AC and DC currents.
The HAL 50-S/SP1 current transducer is composed of two main components: the core and the sensing element. The core is a ferrite ring that is mounted in a thermally conductive housing with two terminal posts. An AC or DC current flowing through this core will generate a voltage that is proportional to the current flow. The sensing element is made of a winding or coil of special insulation. This coil is wrapped around the ferrite core and acts as the sensing element to measure the current flowing through the transducer.
The primary application of the HAL 50-S/SP1 current transducer is to measure and control the current in AC motors. It is also used to monitor and measure the current load on an AC or DC circuit. It is important for the user to set the range of measurement before using the current transducer, as this will determine the accuracy of the measurement. The measurement range can be easily adjusted by using special adjustment potentiometers.
The working principle of the HAL 50-S/SP1 current transducer is based on the principle of electromagnetic induction. When an alternating current is applied to the core, a signal is generated that corresponds to the applied current. This signal is then sent to the sensing element, which amplifies the signal and transfers it to a display device or other type of device.
The HAL 50-S/SP1 current transducer is a reliable and accurate product for measuring and monitoring AC and DC currents. It is easy to install and is designed to be tolerant of harsh environmental conditions. This product line is suitable for a wide range of applications and can be used in both commercial and industrial settings.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PTC-04-DB-HALL06 | Melexis Tech... | 226.06 $ | 1000 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL01 | Melexis Tech... | 99.93 $ | 2 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL02 | Melexis Tech... | 99.93 $ | 3 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL05 | Melexis Tech... | 99.93 $ | 28 | PTC04 DAUGHTERBOARD HALL0... |
PTC-04-DB-HALL03 | Melexis Tech... | 99.93 $ | 4 | PTC04 DAUGHTERBOARD HALL0... |
HALF12T | TDK-Lambda A... | 18.2 $ | 132 | HEATSINK PFE500F WIDTH 1.... |
HALL-ADAPTER-EVM | Texas Instru... | 7.2 $ | 25 | SOT23 TO92 HALL SENSOR BA... |
HAL USB PROGRAMMER TOOL V.1.0 | TDK-Micronas... | 83.16 $ | 59 | BOARD USB PROGRAMMER HALL... |
HAL APV V5.1 | TDK-Micronas... | 399.17 $ | 56 | BOARD PROGRAMR HAL8 HAL10... |
LM4835MTX/HALF | Texas Instru... | 0.0 $ | 1000 | IC AMP AUDIO PWR 2.2W AB ... |
HAL1821UA-A | TDK-Micronas... | 0.73 $ | 1000 | SENSOR LINEAR ANALOG TO92... |
HAL101JQ-I | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL APB V1.5 | TDK-Micronas... | 0.0 $ | 1000 | BOARD PROGRAMMER APB V1.5... |
TL1220R1BBBYB-HALO | E-Switch | 2.93 $ | 1000 | SWITCH TACTILE SPST-NO 0.... |
TL1220R1BBBRG-HALO | E-Switch | 2.3 $ | 1000 | SWITCH TACTILE SPST-NO 0.... |
HAL 100-S | LEM USA Inc. | 52.19 $ | 9 | SENSOR CURRENT HALL 100A ... |
HAL 400-S | LEM USA Inc. | 55.72 $ | 38 | SENSOR CURRENT HALL 400A ... |
HAL 600-S | LEM USA Inc. | 55.72 $ | 25 | SENSOR CURRENT HALL 600A ... |
HAL 50-S | LEM USA Inc. | 39.14 $ | 1000 | SENSOR CURRENT HALL 50A A... |
HAL 200-S | LEM USA Inc. | 39.14 $ | 1000 | SENSOR CURRENT HALL 200A ... |
HAL 300-S | LEM USA Inc. | 41.79 $ | 1000 | SENSOR CURRENT HALL 300A ... |
HAL 500-S | LEM USA Inc. | 41.79 $ | 1000 | SENSOR CURRENT HALL 500A ... |
HAL 50-S/SP1 | LEM USA Inc. | 63.78 $ | 1000 | SENSOR CURRENT HALL 50A A... |
HAL503S-E | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH LATCH SOT... |
HAL101JQ-C | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL107JQ-C | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL107JQ-I | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL SO... |
HAL201JQ-K | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
HAL206JQ-K | TDK-Micronas... | 0.0 $ | 1000 | MAGNETIC SWITCH UNIPOL TO... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...