AX-SFAZ-API-1-01-TB05 RF/IF and RFID |
|
Allicdata Part #: | AX-SFAZ-API-1-01-TB05OSTR-ND |
Manufacturer Part#: |
AX-SFAZ-API-1-01-TB05 |
Price: | $ 1.72 |
Product Category: | RF/IF and RFID |
Manufacturer: | ON Semiconductor |
Short Description: | AUSTRALIA AND NEW ZEALAND SIGFOX |
More Detail: | IC RF TxRx + MCU General ISM ... |
DataSheet: | AX-SFAZ-API-1-01-TB05 Datasheet/PDF |
Quantity: | 1000 |
500 +: | $ 1.55824 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Last Time Buy |
Type: | TxRx + MCU |
RF Family/Standard: | General ISM |
Protocol: | SIGFOX™ |
Modulation: | FSK, GFSK |
Frequency: | 922MHz |
Data Rate (Max): | 600bps |
Power - Output: | 24dBm |
Memory Size: | -- |
Serial Interfaces: | UART |
GPIO: | 8 |
Voltage - Supply: | 2.7 V ~ 3.6 V |
Current - Receiving: | 34mA |
Current - Transmitting: | 230mA |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 40-VFQFN Exposed Pad |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Transceiver ICs are integrated circuits used for the transmission and reception of radio frequency signals. They are used in a wide variety of telecommunications devices and applications, such as cellular telephones, two-way radios, wireless data communication systems, and industrial control systems. The AX-SFAZ-API-1-01-TB05 is a transceiver IC from the AX-Family of integrated circuits specifically designed for low power data transmission and reception.
The AX-SFAZ-API-1-01-TB05 is tailored for operation over the 868 MHz frequency band, and is capable of operation up to a maximum data rate of 19.2 kbps. The integrated circuit features a high receiver sensitivity of -111.0 dBm at 10.2 kbps for a 17.51 dBm transmitter output. The AX-SFAZ-API-1-01-TB05 also utilizes a spread spectrum modulation technique in order to promote improved signal quality and reduced intrusion from interference.
The AX-SFAZ-API-1-01-TB05 operates in a half-duplex mode, meaning it can transmit and receive signals but not at the same time. The device requires an external 32.768 kHz clock signal for operation, which should be supplied by an oscillator with a temperature stability of ±0.2 ppm. The transceiver IC also requires an external Low Noise Amplifier (LNA), and a High Power Amplifier (HPA) in order to achieve optimal performance.
The AX-SFAZ-API-1-01-TB05 utilizes a 128-bit proprietary encryption algorithm for improved data security. This algorithm is based on the Advanced Encryption Standard (AES) which is approved by the US government for use in national and international secure communications. Additionally, the integrated circuit features a built-in Reed Solomon Error Correction feature for improved reliability of data transmission and reception.
The AX-SFAZ-API-1-01-TB05 features a low power consumption of only 8 mA during transmission and 2.2 mA during reception. This low power profile helps to optimize system battery life in applications where the device is powered by a long-lasting primary battery or energy harvesting system. In order to better serve applications requiring multiple remote units, the integrated circuit offers both master/slave and remote node programming options.
The AX-SFAZ-API-1-01-TB05 transceiver IC is ideal for applications such as two-way radios, remote control systems, wireless security systems, industrial control systems, and wireless data communication systems, where low power and long range are essential considerations. The device also offers improved reliability and robust security features, making it an attractive choice for military and secure communications applications.
The specific data is subject to PDF, and the above content is for reference
IC RF TXRX+MCU WIFI 40-VFQFNIC RF TxRx +...
IC RF TXRX+MCU 802.15.4/ISM QFNIC RF TxR...
IC RF TXRX ISM>1GHZ 48-VFQFNIC RF TxRx O...
IC RF TXRX 802.15.4 48-QFNIC RF TxRx Onl...
IC RF TXRX+MCU 802.15.4 64-VFQFNIC RF Tx...
IC RF TXRX+MCU 802.15.4 64-VFQFNIC RF Tx...