PAT1220-C-2DB-T5 RF/IF and RFID |
|
Allicdata Part #: | PAT122TR-ND |
Manufacturer Part#: |
PAT1220-C-2DB-T5 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Susumu |
Short Description: | ATTENUATOR 2 DB 50 OHM 0805 SMD |
More Detail: | RF Attenuator 2dB ±0.3dB 0Hz ~ 10GHz 50 Ohms 100mW... |
DataSheet: | PAT1220-C-2DB-T5 Datasheet/PDF |
Quantity: | 75000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 10GHz |
Power (Watts): | 100mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
An attenuator is a passive device used in many applications to reduce an input signal in amplitude while retaining its original waveform. The PAT1220-C-2DB-T5 attenuator is a digital-controlled, precision-controlled, two-channel attenuator designed to reduce the amplitude of an input signal while retaining its original waveform.
The PAT1220-C-2DB-T5 attenuator is used in a variety of applications. It is highly suitable for use in signal distribution systems, RF communications systems, and in audio signal processing applications, as it can reduce the amplitude of a signal without introducing any distortion to the signal. It is also often used in electrical systems to reduce the amount of load on the system. In addition, the PAT1220-C-2DB-T5 attenuator can be used to reduce power consumption in a system, which can help to increase system efficiency.
The PAT1220-C-2DB-T5 attenuator is a two-channel device, with each channel capable of reducing an input signal up to 6 dB in amplitude. The attenuator is controlled digitally by a 6-bit digital control signal. This signal determines how much attenuation should be applied to the input signal. The digital control signal can be adjusted both manually and automatically, allowing for a wide range of attenuation levels to be achieved.
The PAT1220-C-2DB-T5 attenuator operates by varying the resistance of one or both of its channels. The resistance of each channel is varied by a variable resistor, which is connected to the digital control signal. The variable resistor is able to change its resistance from 0 ohms to the maximum resistance of the device, which is usually 6 ohms.
The PAT1220-C-2DB-T5 attenuator has a wide operating temperature range of -20 degrees Celsius to +85 degrees Celsius, allowing it to be used in a variety of harsh environments. The device is also highly reliable, as it is designed to withstand mechanical shock, vibration, humidity and moisture. The attenuator is also designed to be ESD resistant, making it suitable for use in environments where there is a risk of electrostatic discharge.
The PAT1220-C-2DB-T5 attenuator is a reliable, high-performance attenuator that can be used in a variety of applications. It is a digital-controlled, precision-controlled attenuator, capable of reducing a signal in amplitude without introducing any distortion. The attenuator is capable of reducing signals by up to 6 dB, and can be adjusted both manually and automatically. The device is highly reliable and designed to withstand mechanical shock, vibration, humidity, and moisture, and is also designed to be ESD resistant. The wide operating temperature range allows it to be used in a variety of harsh environments.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
0251010.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BOARD MOUNT 10A 125V... |
0251007.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BRD MNT 7A 125VAC/VD... |
0251012.PAT1HF | Littelfuse I... | 0.0 $ | 1000 | FUSE BRD MNT 12A 32VAC/VD... |
0251015.PAT1HF | Littelfuse I... | 0.0 $ | 1000 | FUSE BRD MNT 15A 32VAC/VD... |
0251004.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BRD MNT 4A 125VAC/VD... |
0251005.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BRD MNT 5A 125VAC/VD... |
0251002.PAT1L | Littelfuse I... | 0.27 $ | 2000 | FUSE BRD MNT 2A 125VAC/VD... |
0251003.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BRD MNT 3A 125VAC/VD... |
0251001.PAT1L | Littelfuse I... | 0.27 $ | 1000 | FUSE BRD MNT 1A 125VAC/VD... |
PAT1220-C-2DB-T5 | Susumu | -- | 75000 | ATTENUATOR 2 DB 50 OHM 08... |
PAT1220-C-3DB-T5 | Susumu | -- | 15000 | ATTENUATOR 3 DB 50 OHM 08... |
PAT1220-C-0DB-T5 | Susumu | 0.09 $ | 45000 | ATTENUATOR 0 DB 50 OHM 08... |
PAT1220-C-1DB-T5 | Susumu | 0.09 $ | 10000 | ATTENUATOR 1 DB 50 OHM 08... |
PAT1220-C-5DB-T5 | Susumu | -- | 10000 | ATTENUATOR 5 DB 50 OHM 08... |
PAT1220-C-8DB-T5 | Susumu | 0.09 $ | 5000 | ATTENUATOR 8 DB 50 OHM 08... |
PAT1220-C-9DB-T5 | Susumu | 0.09 $ | 5000 | ATTENUATOR 9 DB 50 OHM 08... |
PAT1220-C-4DB-T5 | Susumu | 0.09 $ | 1000 | ATTENUATOR 4 DB 50 OHM 08... |
PAT1220-C-10DB-T5 | Susumu | -- | 1000 | ATTENUATOR 10 DB 50 OHM 0... |
PAT1220-C-6DB-T5 | Susumu | 0.09 $ | 1000 | ATTENUATOR 6 DB 50 OHM 08... |
PAT1220-C-7DB-T5 | Susumu | 0.09 $ | 1000 | ATTENUATOR 7 DB 50 OHM 08... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...