Allicdata Part #: | ARF2702-ND |
Manufacturer Part#: |
ATS-1M1F-02DB2W |
Price: | $ 19.61 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | SMA JACK/PLUG ATTENUATOR 2DB 2W |
More Detail: | RF Attenuator 2dB ±0.5% 0Hz ~ 6GHz 50 Ohms 2W SMA ... |
DataSheet: | ATS-1M1F-02DB2W Datasheet/PDF |
Quantity: | 70 |
1 +: | $ 17.82270 |
10 +: | $ 16.08640 |
25 +: | $ 15.41230 |
50 +: | $ 14.44900 |
100 +: | $ 13.96740 |
250 +: | $ 13.19680 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An attenuator is a device used to reduce an audio signal in amplitude without significantly altering its waveform. One of the most common types of attenuators is the ATS-1M1F-02DB2W. This type of attenuator is a single-pole, dual-range, true-balanced attenuator. It is a two-way unit designed for professional audio applications, such as audio mixing consoles and high-end audio equipment. It is also used in sound reinforcement systems and is often used as a insertion loss attenuator.
The ATS-1M1F-02DB2W attenuator is designed to reduce an audio signal by up to 30 dB with low distortion. It utilizes two separate circuits, a first and a second range, which are connected in series. The first range is a true balanced design, using two separate variable resistors and two gain control potentiometers. The second range is a reverse-loaded resistor, which provides additional resistance to the input signal. The combination of these two circuits results in a true-balanced attenuator. This type of attenuator is incredibly efficient in reducing the amplitude of a signal without sacrificing signal fidelity.
The primary application of the ATS-1M1F-02DB2W attenuator is in professional audio applications. It is often used in mixing consoles, sound reinforcement systems, and other high-end audio equipment. Professional audio applications require high-quality signal reduction in order to maintain the fidelity of the signal. The ATS-1M1F-02DB2W attenuator is designed specifically to achieve the highest quality signal reduction without sacrificing sound quality. Additionally, it also provides reliable signal isolation to help reduce interference from external sources.
The working principle of the ATS-1M1F-02DB2W attenuator is fairly straightforward. It utilizes two separate, true-balanced circuits to reduce the amplitude of a signal without sacrificing sound quality. The first circuit is a variable-gain device, which utilizes two separate resistors and two gain control potentiometers. The second circuit is a reverse-loaded resistor, which provides additional resistance to the input signal. The combination of these two circuits provides a true-balanced attenuator that can achieve up to 30 dB of attenuation.
In summary, the ATS-1M1F-02DB2W attenuator is a single-pole, dual-range, true-balanced attenuator designed for professional audio applications. It utilizes two separate true-balanced circuits to reduce the amplitude of a signal without sacrificing sound quality. The device is designed to achieve up to 30 dB of attenuation with low distortion and reliable signal isolation. It is commonly used in audio mixing consoles, sound reinforcement systems, and other high-end audio equipment.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...