ATS-2M2F-03DB2W

Series:	--
Packaging:	Bag
Part Status:	Active
Attenuation Value:	3dB
Frequency Range:	0Hz ~ 6GHz
Power (Watts):	2W
Impedance:	50 Ohms
Package / Case:	N-Type In-Line Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators: ATS-2M2F-03DB2W application field and working principle

Attenuators are electrical components that are designed to reduce the power of an incoming electrical signal. They are used in a variety of applications, from high power systems to low power audio systems. The ATS-2M2F-03DB2W is a particular type of attenuator used in audio applications. This attenuator can be used to reduce the level of a signal from one audio source to another. The ATS-2M2F-03DB2W is a three-way attenuator. It has two male connectors on one side and two female connectors on the other. This allows it to be connected between two audio sources, one at the receiving end and one at the sending end. It has a maximum input power of 20W and a maximum output power of 6W. The two male connectors are connected to the two female connectors by means of a thin metal film.The ATS-2M2F-03DB2W attenuator works by reducing the power of the incoming signal before it reaches the receiving device. This is done by means of a simple resistive network, which is made up of two resistors, one on each side of the attenuator. By adjusting the values of these two resistors, the attenuation can be set to the desired level. The most common resistance values for this type of device are 10 ohms, 50 ohms and 100 ohms. In order to use the ATS-2M2F-03DB2W attenuator, it is necessary to first connect it between the two audio sources. The two male connectors should be connected to the two female connectors. Once this is done, the resistors can then be adjusted to set the desired attenuation level. It is important to note that a higher resistance value will result in less power being attenuated. This means that if a high attenuation is desired, then lower resistance values should be used.The ATS-2M2F-03DB2W attenuator is a cost-effective and easy to use device that can be used for a variety of audio applications. It has the capability to reduce the level of an incoming signal from one audio source to another. It works by means of a simple resistive network and can be adjusted to the desired attenuation level. It is cost effective, easy to use and provides good audio quality.

The specific data is subject to PDF, and the above content is for reference