ATS-2M2F-30DB2W

Series:	--
Packaging:	Bag
Part Status:	Active
Attenuation Value:	30dB
Frequency Range:	0Hz ~ 6GHz
Power (Watts):	2W
Impedance:	50 Ohms
Package / Case:	N-Type In-Line Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATS-2M2F-30DB2W Application Field and Working Principle

Attenuators are electrical components that reduce the strength of a signal by reducing the amplitude of the noise or other interference. They are essential for applications where noise and interference must be controlled to achieve a desired level of performance, as they are used to protect sensitive equipment from overloading. The ATS-2M2F-30DB2W is a particular type of attenuator that is designed to reduce the signal strength by 30 decibels (dB) over a frequency range of 2–2.2 megahertz (MHz).In application fields that require the precise control of signal strength, such as electronics, telecommunications, and medical equipment, the ATS-2M2F-30DB2W is ideal thanks to its high level of signal attenuation accuracy. Its two-way design allows it to be used for both inbound and outbound signal control, meaning it can be used in situations where signal accuracy is essential. Furthermore, due to its compact size, it can be installed in virtually any type of electronic equipment with minimal effort.The ATS-2M2F-30DB2W operates under the same fundamental principle as all attenuators – that is, it reduces signal strength by introducing resistance into the signal path. When a signal is applied to the attenuator, it is split into two parts – one of which is passed through a resistive medium and the other through a reflective medium, both of which absorb and convert some of the signal energy. The attenuator then combines these two streams of attenuated energy to produce a signal with greatly reduced strength, while maintaining the original signal information.The primary benefit of the ATS-2M2F-30DB2W is its ability to provide precise signal attenuation control over a wide range of frequencies – from 2–2.2 MHz. This makes it ideal for applications where signal strength must be precisely controlled, such as radio frequency ( RF) communications and instrumentation systems. Additionally, the ATS-2M2F-30DB2W offers a low insertion loss of less than 0.3 dB, making it highly efficient at preserving signal integrity.In terms of installation, the ATS-2M2F-30DB2W has a simple design that makes it easy to install in any type of electronic device. It can be wired directly to the circuit board or devices – such as power supplies, amplifiers, and mixers – and can be fitted with flexible and rigid coaxial cables. Moreover, the attenuator is fully compliant with the EN60945 and MIL-STD-461 standards, which significantly reduces the risk of interference or signal leakage.The ATS-2M2F-30DB2W is an ideal choice for any application where precise signal attenuation control and protection from electrical interference are essential requirements. Thanks to its high accuracy and efficient performance, it can be installed in a wide range of electronic devices and systems with ease.

The specific data is subject to PDF, and the above content is for reference