Allicdata Part #: | ARF2791-ND |
Manufacturer Part#: |
ATS-2M2F-20DB5W |
Price: | $ 49.81 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | ATTENUATOR N JACK/PLUG 20DB 5W |
More Detail: | RF Attenuator 20dB 0Hz ~ 6GHz 50 Ohms 5W N-Type I... |
DataSheet: | ATS-2M2F-20DB5W Datasheet/PDF |
Quantity: | 9 |
1 +: | $ 45.27180 |
10 +: | $ 42.60820 |
25 +: | $ 41.27660 |
50 +: | $ 38.61370 |
100 +: | $ 36.48320 |
Series: | -- |
Packaging: | Bag |
Part Status: | Active |
Attenuation Value: | 20dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 5W |
Impedance: | 50 Ohms |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic devices that reduce the strength of a signal. The ATS-2M2F-20DB5W is a specialized type of attenuator, designed to operate in microwave frequencies. It is widely used in many applications, from military radar to wireless communications.
The ATS-2M2F-20DB5W is composed of two parts. The first part is a pair of matched, serially-connected, dual-junction, back-to-back Schottky diode attenuators. The second part is a low-loss filter network consisting of two series-connected filter sections.
The dual-junction Schottky diode attenuators are designed to provide 20 dB of attenuation with a frequency response from 0.5 to 18 GHz. They have good linearity and low noise figure. The attenuator can be tuned to different frequencies depending on the application.
The filter network is designed to reject any spurious interference outside the attenuated frequency range and provide a smooth, predictable transmission. The filter consists of two filter sections with a total of 10 filter sections. These filter sections reduce harmonic distortion and provide harmonically correct signal within the designed bandwidth.
The ATS-2M2F-20DB5W provides precise signal control at high frequencies. Its combination of dual diode attenuators and filter network allows it to attenuate signals up to 20 dB in a very wide frequency range.
The ATS-2M2F-20DB5W is used in many applications, including military and civilian communications, medical imaging, scientific instrumentation, and satellite communication. It is also used as a source of low-level electronic noise for laboratory experimentation. Its combination of high-frequency characteristics and low-noise performance allows the ATS-2M2F-20DB5W to be used in a wide variety of applications.
In summary, the ATS-2M2F-20DB5W is an advanced attenuator designed to provide wide-range frequency control and low-noise signal performance. Its combination of diode attenuators and filter network allows it to provide accurate signal attenuation up to 20 dB. It is widely used in many applications, from military communications to medical imaging.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...