Allicdata Part #: | ARF2701-ND |
Manufacturer Part#: |
ATS-1M1F-01DB2W |
Price: | $ 19.61 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | SMA JACK/PLUG ATTENUATOR 1DB 2W |
More Detail: | RF Attenuator 1dB ±0.5% 0Hz ~ 6GHz 50 Ohms 2W SMA ... |
DataSheet: | ATS-1M1F-01DB2W Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 17.82270 |
10 +: | $ 16.08640 |
25 +: | $ 15.41230 |
50 +: | $ 14.44900 |
100 +: | $ 13.96740 |
250 +: | $ 13.19680 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are one of the most common passive electronic components found in a variety of applications, from AC and DC audio systems to radio and television receivers. The ATS-1M1F-01DB2W is a type of attenuator used in radio frequency (RF) applications, such as signal distribution systems. It is a two-wire Precision Attenuator, meaning it is designed to provide precise attenuation with more control than other attenuators.
The ATS-1M1F-01DB2W attenuator has a very wide frequency range of 0.7 to 40,000 MHz (40 GHz). It has three adjustable settings that allow users to select different levels of attenuation from 0dB to 10dB. Due to its wide frequency range and precise attenuation, it is an ideal component in applications such as cellular communications, satellite communications, and digital and analog TV broadcasting. It is also very commonly used in instrumentation or laboratory applications that require precise attenuation levels.
The ATS-1M1F-01DB2W is a wire lead attenuator, meaning it has two wires coming out from each end, making it suitable for easy installation. Its two-wire construction also allows for better thermal conductivity compared to three-wire attenuators. Its design also includes a built-in protection circuit designed to prevent overload conditions that may damage the attenuator. Additionally, the attenuator has a very good coefficient of linearity and a very low insertion loss.
The working principles of an attenuator are very simple. It is essentially an electrical device designed to reduce the power of an applied signal by a certain amount. It works by reducing the amplitude of the signal, while maintaining the same frequency. The ATS-1M1F-01DB2W attenuator works by absorbing a portion of the signal power before it is allowed to pass through. The absorbed power is then dissipated in the form of heat. The more power that is absorbed, the more the signal is attenuated.
In conclusion, the ATS-1M1F-01DB2W is a type of precision attenuator designed for a wide range of RF applications. It has a wide frequency range and accurate attenuation levels, making it ideal for applications such as cellular communications, broadcasting, and laboratory work. It is a two-wire attenuator with a built-in protection circuit that prevents overload conditions that may damage the attenuator. The attenuator works by absorbing a portion of the signal before it is allowed to pass, resulting in the desired attenuation of the signal.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...