Allicdata Part #: | ARF2706-ND |
Manufacturer Part#: |
ATS-1M1F-06DB2W |
Price: | $ 19.61 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | SMA JACK/PLUG ATTENUATOR 6DB 2W |
More Detail: | RF Attenuator 6dB ±0.5% 0Hz ~ 6GHz 50 Ohms 2W SMA ... |
DataSheet: | ATS-1M1F-06DB2W Datasheet/PDF |
Quantity: | 35 |
1 +: | $ 17.82270 |
10 +: | $ 16.08640 |
25 +: | $ 15.41230 |
50 +: | $ 14.44900 |
100 +: | $ 13.96740 |
250 +: | $ 13.19680 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ATS-1M1F-06DB2W attenuator is a device used to reduce the amplitude of electronic signals without changing their waveforms. It can typically be used in RF communications applications, particularly where a high degree of flexibility and precision is required. This attenuator is designed to provide an accurate, reliable, and consistent level of signal attenuation.
The ATS-1M1F-06DB2W attenuator is used mainly in the wireless communication industry. This attenuator is used in wireless communication applications such as cellular telephones, wireless data networks, and satellite communication systems. It is used to adjust the level of the signal being transmitted or received. This is useful in applications where the input signal power needs to be reduced to protect sensitive components and prevent overload.
The ATS-1M1F-06DB2W attenuator can be used to adjust the power of the signal, and it can also be used to adjust the frequency response characteristics of the signal. This is useful for applications which require a specific maximum power level or specific frequency response characteristics. The ATS-1M1F-06DB2W can also be used to eliminate interference in the transmission of signals across short distances.
In terms of its working principle, the ATS-1M1F-06DB2W attenuator is designed to provide accurate, reliable, and consistent levels of signal attenuation. It uses a combination of resistors, capacitors, and inductors to create an adjustable electrical impedance between two points. When the input signal is applied to the attenuator, the resistors, capacitors, and inductors interact in such a way that the phase and amplitude of the signal is substantially reduced. The level of reduction is adjustable by varying the frequency of the signal being applied.
The ATS-1M1F-06DB2W attenuator is a precision instrument that is designed to provide highly accurate and consistent levels of attenuation. It is also designed to provide extreme flexibility in applications where a specific level of power reduction is required. It is an ideal device for use in a wide variety of RF communications applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...