PXV1220S-2DBN3-T02 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An attenuator is a device that reduces the power of a signal without causing a change in the waveform of the signal. PXV1220S-2DBN3-T02 is a low-power, wide-range variable power, fixed-terminal, attenuator housed in a 12-pin plastic package designed to suit most applications. It is a low-power single-level attenuator that requires only a DC power supply.

The PXV1220S-2DBN3-T02 has a broad range of features tailored to different application fields. Its wide frequency range of 65 kHz to 65 GHz makes it suitable for RF applications. It also has a constant slope factor, and a temperature-compensated design, which makes it suitable for various power amplifier applications, from mobile communication to data transmission across long distances. It is also suitable for laboratory uses and signal sampling applications, as it provides accurate signal level control.

In terms of working principle, the PXV1220S-2DBN3-T02 attenuator is designed with a single-IP system. Its low-power design ensures the signal level can be varied in 1 dB steps, with a maximum power output of +5 dBm, which can be adjusted at all frequencies. It uses two PIN diodes connected in series in order to provide a high impedance at one port of the circuit, while the other port provides the path for the signal to be attenuated. When a variable voltage is applied to the control pins, the PIN diodes can vary the amount of power attenuated, allowing for fine control of the signal level.

The PXV1220S-2DBN3-T02 attenuator is designed for use in a wide range of RF applications, from communication systems and satellite applications, to broadcast systems and power amplifiers. Its low-power design and wide range of features make it suitable for a wide range of applications. It is one of the most reliable and cost-efficient attenuators available, and is used in many applications where accurate signal level control is required.

The specific data is subject to PDF, and the above content is for reference