58-CBSA-1.5X4.5X0.5 Allicdata Electronics
Allicdata Part #:

58-CBSA-1.5X4.5X0.5-ND

Manufacturer Part#:

58-CBSA-1.5X4.5X0.5

Price: $ 15.13
Product Category:

RF/IF and RFID

Manufacturer: Leader Tech Inc.
Short Description: 58 SERIES CBS SHIELD ASSEMBLY -
More Detail: RF Shield Shield, 2-Piece 1.500" (38.10mm) X 4.500...
DataSheet: 58-CBSA-1.5X4.5X0.5 datasheet58-CBSA-1.5X4.5X0.5 Datasheet/PDF
Quantity: 1000
22 +: $ 13.75290
Stock 1000Can Ship Immediately
$ 15.13
Specifications
Series: 50-CBS
Packaging: Bulk 
Part Status: Active
Type: Shield, 2-Piece
Height - Overall: 0.500" (12.70mm)
Length - Overall: 4.500" (114.30mm)
Width - Overall: 1.500" (38.10mm)
Ventilation: Vent Holes in Pattern
Mounting Type: Through Hole
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are devices that contain external metallic objects designed to block or attenuate specified electromagnetic frequencies. They are useful for RF immunity testing, protecting your sensitive equipment from undesired electromagnetic radiation, and even for medical instrumentation. The 58-CBSA-1.5X4.5X0.5 is an example of an RF Shield designed for a specific purpose. This article will discuss the application field and working principle of the 58-CBSA-1.5X4.5X0.5.

The 58-CBSA-1.5X4.5X0.5 is an RF Shield designed for use in communication systems. It is a type of drop-in shield designed to reduce the amount of unwanted and unnecessary radiation emitted by a communications system. It is specifically designed to reduce interference from electromagnetic waves with the goal of improving reception in a receiver. It is typically used in receivers located close to powerful transmitters and in systems with high levels of background noise.

The 58-CBSA-1.5X4.5X0.5 is designed to reduce interference by blocking emissions from reaching the receiver. It works by absorbing, reflecting, and dispersing the incoming radiation. This is accomplished by either creating a barrier between the source and the receiver, or by dissipating the energy in the RF waves, converting it to heat before it reaches the receiver. The 58-CBSA-1.5X4.5X0.5 is made out of a metallic mesh with apertures ranging from 1.5 to 4.5 mm. These apertures help to absorb, reflect, and disperse the incoming radiation.

In order to make sure that the 58-CBSA-1.5X4.5X0.5 is effective at reducing interference, it must be tested. This is done by testing the signal-to-noise ratio (SNR) of the shielded system. The SNR is a measure of the signal power compared to the noise power. The higher the SNR, the better the shielding is at reducing interference. The 58-CBSA-1.5X4.5X0.5 can be tested using a variety of methods such as a Network Analyzer, an Oscilloscope, or even a Sine Wave Generator.

The 58-CBSA-1.5X4.5X0.5 is a versatile RF Shield and can be used in a wide variety of communication systems. It can be used in cellular phones, wireless LANs, satellite TV receivers, and even in radio frequency identification (RFID) systems. It is also used to reduce unwanted interference in medical instruments such as EEGs or ECGs. The 58-CBSA-1.5X4.5X0.5 is ideal for systems where the transmission of data requires a maximum amount of protection and minimal interference.

In conclusion, the 58-CBSA-1.5X4.5X0.5 is an RF Shield designed to reduce unwanted and unnecessary interference in communication systems. Its metallic mesh, with apertures ranging from 1.5 to 4.5 mm, absorbs, reflects, and disperses incoming radiation. It can be used in a variety of communication systems such as cellular phones, LANs, satellite TV receivers, and RFID. It is ideal for systems where the transmission of data requires a maximum amount of protection and minimal interference.

The specific data is subject to PDF, and the above content is for reference

Latest Products
48-CBSA-1.25X5.75X0.4

48 SERIES CBS SHIELD ASSEMBLYRF Shield S...

48-CBSA-1.25X5.75X0.4 Allicdata Electronics
49L-CBSFNSV-0.75X1.75X0.5

49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...

49L-CBSFNSV-0.75X1.75X0.5 Allicdata Electronics
21M-CBSA-5.25X5.75X0.225

21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...

21M-CBSA-5.25X5.75X0.225 Allicdata Electronics
42-CBSA-5.0X5.75X0.4

42 SERIES CBS SHIELD ASSEMBLYRF Shield S...

42-CBSA-5.0X5.75X0.4 Allicdata Electronics
55-CBSA-4.5X5.75X0.5

55 SERIES CBS SHIELD ASSEMBLY -RF Shield...

55-CBSA-4.5X5.75X0.5 Allicdata Electronics
29-CBSA-5.75X6.0X0.2

29 SERIES CBS SHIELD ASSEMBLY -RF Shield...

29-CBSA-5.75X6.0X0.2 Allicdata Electronics