49-CBSF-4.0X7.0X0.4

Series:	40-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.400" (10.16mm)
Length - Overall:	7.000" (177.80mm)
Width - Overall:	4.000" (101.60mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

RF Shields are used to reduce or eliminate the effect of high frequency interfering electromagnetic radiation on other electronic circuits. They are generally constructed of highly conductive sheet, etching or wire-mesh. Common packages for RF Shields include can shields, splined lids, printed circuit board mounted enclosures, and snap-lock boxes. The 49-CBSF-4.0X7.0X0.4 is a type of RF Shield used for a variety of applications, and its working principle is based on its physical properties.

Physical Properties:

The 49-CBSF-4.0X7.0X0.4 consists of a metal sheet that is 4.0” wide, 7.0” long, and 0.4” thick. This metal sheet is composed of a highly conductive material, typically aluminum or copper, and is designed to be highly resistant to corrosion. The metal sheet is then cut into sections, creating small “shields” of varying sizes that are arranged around, and at specific distances to, other electronic components.

Application fields for the 49-CBSF-4.0X7.0X0.4:

The 49-CBSF-4.0X7.0X0.4 is used in applications where it is necessary to reduce or eliminate the effects of electromagnetic interference (EMI). This type of RF Shield has been used in a wide range of applications, such as:

• Cellular base station antennas
• Avionics systems
• Radar systems
• Satellite communications systems
• Military communications systems
• High power industrial equipment
• Automotive electronics systems

Working Principle:

The 49-CBSF-4.0X7.0X0.4 is designed to shield surrounding electronics against high frequency electromagnetic interference (EMI) by absorbing or reflecting the radiation. This is done by creating a conductive barrier between the interfering radiation and the shielded electronics, to block or divert the energy away from the electronics. By creating this barrier, the interfering radiation is unable to reach the sensitive electronic components and therefore has no effect on their operation.

Conclusion:

The 49-CBSF-4.0X7.0X0.4 is a type of RF Shield that is used to reduce or eliminate the effect of high frequency interfering electromagnetic radiation on other electronic circuits. It is composed of a highly conductive metal sheet that is 4.0” wide, 7.0” long, and 0.4” thick, and is used in a variety of applications where it is necessary to reduce or eliminate the effects of interference. The metal sheet is cut into sections and arranged at specific distances to other electronic components, creating a conductive barrier that blocks or diverts the interfering radiation away from the sensitive electronic components.

The specific data is subject to PDF, and the above content is for reference