| Allicdata Part #: | 1568-1616-ND |
| Manufacturer Part#: |
COM-09806 |
| Price: | $ 0.67 |
| Product Category: | Potentiometers, Variable Resistors |
| Manufacturer: | SparkFun Electronics |
| Short Description: | TRIMPOT 10K WITH KNOB |
| More Detail: | 10 kOhms 0.5W, 1/2W PC Pins Through Hole Trimmer P... |
| DataSheet: |  COM-09806 Datasheet/PDF |
| Quantity: | 2079 |
| 1 +: | $ 0.59850 |
| Series: | -- |
| Part Status: | Active |
| Resistance: | 10 kOhms |
| Power (Watts): | 0.5W, 1/2W |
| Tolerance: | ±10% |
| Temperature Coefficient: | ±100ppm/°C |
| Number of Turns: | 1 |
| Adjustment Type: | Top Adjustment |
| Resistive Material: | Cermet |
| Mounting Type: | Through Hole |
| Termination Style: | PC Pins |
| Size / Dimension: | Square - 0.375" x 0.375" Face x 0.190" H (9.53mm x 9.53mm x 4.83mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Trimmer Potentiometers control the electrical characteristics of a circuit by varying the resistance of a component. They are commonly used in a variety of applications, such as controlling the volume of audio devices, adjusting the frequencies of radio receivers, and adjusting the power supply voltage of integrated circuits. The COM-09806 is a trimmer potentiometer that can be used to adjust the resistance of a circuit.
Application Fields
The COM-09806 is designed for use in AC and DC circuits where controlling the resistance is required. It can be used to adjust the position of a component in a given circuit. For example, it can be used to adjust the frequency of a radio receiver, or the voltage output of a device.
Working Principle
The COM-09806 is a single-turn potentiometer. It uses a resistive element to change the resistance of a circuit when the knob is adjusted. The resistive element consists of a wiper which moves along a resistor track to adjust the resistance. The end of the resistor track is kept at a fixed position to ensure a constant resistance.
The knob on the COM-09806 is connected to the wiper, which is connected to the resistive element. As the knob is adjusted, the wiper moves along the resistor track. This changes the position of the wiper, and thus changes the resistance of the circuit. The COM-09806 is designed to provide an output resistance from 0 ohms to 500K ohms.
Conclusion
The COM-09806 is a trimmer potentiometer designed for use in AC and DC circuits where controlling the resistance is required. It can be used to adjust the position of a component in a given circuit. The resistive element consists of a wiper which moves along a resistor track to adjust the resistance, and can provide an output resistance from 0 ohms to 500K ohms.
The specific data is subject to PDF, and the above content is for reference
TRIMMER 20K OHM 0.25W PC PIN20 kOhms 0.2...
TRIMMER 20K OHM 0.25W PC PIN20 kOhms 0.2...
TRIMMER 2K OHM 0.25W PC PIN2 kOhms 0.25W...
TRIMMER 200 OHM 0.25W PC PIN200 Ohms 0.2...
TRIMMER 200 OHM 0.25W PC PIN200 Ohms 0.2...
TRIMMER 20 OHM 0.25W PC PIN20 Ohms 0.25W...