P61-1500-S-A-I36-4.5V-C

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Sealed Gauge
Operating Pressure:	1500 PSI (10342.14 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Male - 1/4" (6.35mm) NPT
Port Style:	Threaded
Features:	--
Termination Style:	36" Integral Harness
Maximum Pressure:	4500 PSI (31026.41 kPa)
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, TransducersPressure sensors, transducers, are mainly designed and engineered to accurately measure the pressure and temperature of gases or liquids. Generally speaking, these instruments consists of several components such as membranes, strain gages, diaphragms, or strain-sensitive piezoelectric crystals. In terms of P61-1500-S-A-I36-4.5V-C, it is a pressure transducer with 4.5 V supply voltage.Nowadays, the advanced technology has enabled pressure sensing technology to become an important part of a wide range of applications. Such applications include industrial pressure and temperature measurements, medical diagnostic equipment, and even aircraft test and control systems. Typically, most pressure sensors use piezo-resistive technology to measure pressures in range from vacuum to ultra-high vacuum. This piezo-resistive technology work based on the fact that when applied with force, the resistance of a strain gage changes, which in turn can be translated into a measurable change in electrical signal. To continue with the P61-1500-S-A-I36-4.5V-C pressure transducer, it is a type of low capacity pressure transducer designed for measuring relative and absolute pressure, under both positive and negative pressure. This is due to the fact that this transducer is designed with an isolated diaphragm. It can measure pressure up to 1500 psi or 10 MPa, depending on the model. Furthermore, thispressure transducer is also combined with a ceramic capacitive element that is temperature compensated over a wide range. This enables the transducer to accurately output the corresponding analogue voltage signals for the corresponding pressure measurement.In addition, this pressure transducer also has a zero shift compensation feature. This compensation feature is used to adjust the zero point voltage of the pressure transducer, in order to neutralize the voltage output offset generated by the system. Apart from that, the P61-1500-S-A-I36-4.5V-C also features temperature compensation, due to the existence of a wide temperature compensation range from -40 to 85 degrees Celsius. This feature allows the transducer to accurately measure the pressure changes relative to temperature.Lastly, this pressure transducer also features a protection system that helps eliminate false readings due to water intrusion and various environmental hazards. This is made possible due to the presence of a durable, stainless steel housing which is constructed with an IP65 rating to protect against dust particles, water, and other contaminants.To sum up, P61-1500-S-A-I36-4.5V-C is a pressure transducer that combines the principles of piezo-resistive technology, ceramic capacitive elements, and temperature compensation. It can be used for a wide variety of applications such as industrial pressure and temperature measurements, medical diagnostic equipment, and aircraft test and control systems. Additionally, its features such as zero shift compensation and protection system enable it to accurately measure and respond to changes in pressure and temperature.

The specific data is subject to PDF, and the above content is for reference