TXD2SA-2M-3V-Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are used to detect and switch between the electrical signals of two circuits. They use a small voltage to control a large voltage, making them perfect for applications where a low-current circuit needs to be switched on or off using a high-current circuit. TXD2SA-2M-3V-Z is a signal relay that can work at currents up to 2 Amps. It is suitable for applications where a low-current circuit needs to be switched on or off using a high-current circuit.

The TXD2SA-2M-3V-Z is a contact-activated signal relay. It is a compact, 2-pole, normally-open (NO), subminiature, non-polarized, surface-mounted device. It is designed for printed circuit boards and is available in two versions; one with a coil voltage rating of 2.5 volts and one with a coil voltage rating of 3 volts. It has a maximum contact rated voltage of 250 VAC and a maximum contact rated current of 2 Amps. The operating temperature range is -40 to +85 Celsius.

The TXD2SA-2M-3V-Z is a form of electromagnetic relay. When it is activated, an electromagnetic field is created that causes the movable contacts of the relay to open or close, depending on the design of the device. As the amount of current applied to the relay’s coil increases, more energy is generated which creates a stronger electromagnetic field, further closing or opening the contacts. The contacts can remain in the closed or open positions as long as this current is maintained.

The TXD2SA-2M-3V-Z is used in a variety of applications. It can be used to switch between two power sources, such as a battery and the AC line, or between two control sources, such as two computers. It can also be used to activate a circuit in response to a low-power signal, such as a logic gate or a low-voltage sensor. Additionally, it can be used to switch between two devices, such as a printer and a scanner.

The TXD2SA-2M-3V-Z’s working principle is fairly straightforward. When the coil voltage is greater than the operating voltage threshold, the relay will activate and the contacts will close, allowing current to flow. When the coil voltage is lower than the operating voltage threshold, the relay will deactivate and the contacts will open, preventing current to flow. This simple process allows the TXD2SA-2M-3V-Z to act as an on/off switch for controlling the flow of current in a circuit.

The TXD2SA-2M-3V-Z is a versatile signal relay that is suitable for a wide range of applications. Its small form factor, low-power operation, and high current rating make it perfect for use in control systems that require high-current switching. With its wide operating temperature range, it can be used in a variety of environments and is capable of meeting the demands of even the most demanding applications.

The specific data is subject to PDF, and the above content is for reference