9007-12-50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Reed relays are switch devices actuated by an applied magnetic field and actuated by the inherent forces in the reed relay contact mechanism, usually a ferromagnetic material. They are usually small and have good reliability and repeatability. The 9007-12-50 is one such reed relay, which has a variety of potential uses in a range of applications.

The 9007-12-50 reed relay is a single-pole double-throw switch. It has a maximum voltage of 12 volts DC, and it\'s switching current rating is 50mA. The coil current required for switching is 18mA at 55Hz, while the bounce time is 2.2ms. The device is also rated for a maximum power dissipation of 200mW.

The 9007-12-50 reed relay is a good option for low voltage DC applications, which require a safe relay with a low power consumption level. It can be used to switch, for example, a digital circuit on and off. It can also be used to switch a pair of electrical contacts in the presence of low current and voltage, which makes it suitable for use in controlling, isolating and bypassing circuits in low power equipment. Overall, it\'s a dependable and reliable device for a wide variety of applications.

The working principle of the 9007-12-50 is based on the magnetic flux generated by the current in the reed relay\'s coil winding. When the current is applied to the coil, magnetic field lines are created in the surrounding air gap and electrical contactor. When these magnetic flux lines interact with the ferromagnetic material of the contactor, it causes the contactor body to be physically drawn towards the coil, thus actuating the switch. When the current in the coil is turned off, the contactor returns to its original position, thus switching off the circuit.

In conclusion, the 9007-12-50 reed relay is a great choice for applications requiring low voltage dc switching. It has good reliability and repeatability, and low power consumption. It can be used to switch low voltage and current circuits, or to control, isolate and bypass certain circuits. The working principle of the relay is based on the magnetic flux lines generated by the coil current, and it is a dependable and reliable device for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference