YC248-JR-071K1L

Resistor Networks, Arrays are among the most widely used components in almost any electronic system today. Resistor networks and arrays are arrays of resistors, or other components, used to provide a constant level of resistance, impedance, or voltage between two points in a circuit or to provide power to a circuit or to provide power to a load. The YC248-JR-071K1L is a commonly used resistor network.

The YC248-JR-071K1L is a low-cost, high-performance, three line network array with a total resistance of 0.071KΩ. It is designed for maximum reliability and low profile to meet the demands of surface mounting technology. It is fabricated with gold palladium-plated terminals. It has 3 pins with nominal values of 0.1Ω, 0.5Ω and 0.71KΩ. The total resistance is 0.071KΩ with a nominal tolerance of ± 10%.

The YC248-JR-071K1L can be used in a variety of applications such as voltage regulators, motor control circuits, power supplies, and audio applications. In voltage regulator applications the three-line network array provides a constant voltage source that is adjustable by varying the resistance of the three lines. The three insulators are connected to three different voltage levels, so by adjusting the resistance of each line, the total voltage level can be adjusted.

In motor control circuits, the YC248-JR-071K1L can be used to provide a constant level of resistance and impedance between two points in the circuit. This allows the motor to operate at the required load and speed. It is also commonly used in audio applications as a power supply for transistors and other audio components in order to provide a constant voltage or current source.

The YC248-JR-071K1L is a resistive network that can be used in a variety of applications, due to its low profile, high reliability and low cost. It is designed to provide a constant level of resistance, impedance, or voltage between two points in a circuit or to provide power to a circuit or load.