VI-2T2-CW-B1

Series:	VI-200™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	66V
Voltage - Input (Max):	160V
Voltage - Output 1:	15V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	6.67A
Power (Watts):	100W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, OTP, OVP, SCP
Operating Temperature:	-25°C ~ 85°C
Efficiency:	90%
Mounting Type:	Through Hole
Package / Case:	Full Brick
Size / Dimension:	4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are an electro-mechanical device used to convert direct current (DC) from one voltage level to another. They are used in a multitude of applications where AC power is not available or cannot be used, such as in some types of automobiles, clean energy applications, telecommunications, and many other applications.The VI-2T2-CW-B1 DC-DC converter is a high performance, high efficiency, low-cost unit. It is designed to provide power conversion between DC input voltages of 4 to 16 volts, and output voltages of 40 to 300 volts. The converter has a power rating of 2 watts, and a maximum output current of 200mA.The VI-2T2-CW-B1 converter uses a switching regulator design, which employs two separate switches, which are combined to form a bridge rectifier. The bridge rectifier allows the incoming direct current to be split into two or more separate DC supplies, which can then be regulated to the desired output voltage.The operation of the VI-2T2-CW-B1 converter is based on the principle of switching regulator design. In this design, the two switches are activated in a predetermined pattern to regulate the output voltage to a desired level. As the incoming voltage is higher than the output voltage, the duty cycle of the two switches is reduced, while the voltage is lowered when the input voltage is lower than the output voltage. This process is repeated constantly to regulate the output voltage at the desired level.The VI-2T2-CW-B1 converter is designed for applications in automotive, clean energy, and telecommunications. In vehicles, the VI-2T2-CW-B1 converter is used to convert standard 12V DC car battery voltage to higher voltages needed for accessories such as lights, radios, and interior electronics. The VI-2T2-CW-B1 converter is also used in clean energy applications such as wind turbines and solar arrays, to provide higher voltages for the efficient operation of the turbines and panels. In telecommunications applications, it can provide the power needed for various types of radios, cellular phone towers, and other electronic devices.In summary, the VI-2T2-CW-B1 DC-DC converter is an efficient, low cost solution for applications in automotive, clean energy, and telecommunications. It is easy to install and use, and is designed to be robust and reliable in operation. Its ability to convert between DC voltages of different levels makes it an ideal choice for many applications where AC power is not available or cannot be used.

The specific data is subject to PDF, and the above content is for reference