VI-JTL-IW Power Supplies - Board Mount

Series:	VI-J00™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	66V
Voltage - Input (Max):	160V
Voltage - Output 1:	28V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	3.57A
Power (Watts):	100W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, SCP
Operating Temperature:	-40°C ~ 100°C
Efficiency:	90%
Mounting Type:	Through Hole
Package / Case:	Half Brick
Size / Dimension:	2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm)
Base Part Number:	VI-JTL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are electronic components used in a wide variety of applications. They are primarily used to convert a low-voltage DC power source into a higher one. It is also used to modify the signal or current in an electronic circuit. The two most common types of DC to DC converters are VI-JTL-IW and Buck-Boost converters.VI-JTL-IW is a popular type of DC to DC converter. It stands for Voltage Injection-Junction Transistor Logic Integrated Waveform converter. This converter operates by taking a variable-voltage DC input voltage and transforming it into a higher one. It is capable of accepting a wide range of input voltages, from a few millivolts up to several hundred volts. It also output currents of up to around 400 Amperes.VI-JTL-IW has a wide range of applications. It is commonly used in the power electronics industry, such as gaming systems, medical and aerospace applications, motor controls, and a variety of other applications. It is also used in industrial, automotive, and consumer products. Additionally, VI-JTL-IW is very efficient due to its switching technology, which reduces losses in the converter.The working principle of a VI-JTL-IW converter is based on the use of junction transistors to control the direction and magnitude of the current. The junction transistors are controlled by logic signals which are generated from logic integrated waveforms. This will cause the output voltage to become either higher or lower than the input voltage depending on the logic signals.The VI-JTL-IW converter is capable of regulating the output voltage. This is accomplished by detecting the change in the output voltage and then adjusting the input voltage in order to maintain the desired output level. Furthermore, it can be used to provide a high voltage output, if the input source is not able to do so.The VI-JTL-IW converter is an important tool for the power electronics industry. It is used in a variety of applications ranging from gaming systems to motor controls. It offers a wide range of advantages including efficiency, high output voltage, and current regulation. It is an important component in any power electronics system.

The specific data is subject to PDF, and the above content is for reference