VI-J60-EZ Allicdata Electronics
Allicdata Part #:

1102-6020-ND

Manufacturer Part#:

VI-J60-EZ

Price: $ 92.86
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 5V 25W
More Detail: Isolated Module DC DC Converter 1 Output 5V 5A ...
DataSheet: VI-J60-EZ datasheetVI-J60-EZ Datasheet/PDF
Quantity: 1
1 +: $ 84.42000
10 +: $ 83.07740
Stock 1Can Ship Immediately
$ 92.86
Specifications
Series: VI-J00™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 200V
Voltage - Input (Max): 400V
Voltage - Output 1: 5V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 5A
Power (Watts): 25W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, SCP
Operating Temperature: -10°C ~ 100°C
Efficiency: 88%
Mounting Type: Through Hole
Package / Case: Half Brick
Size / Dimension: 2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm)
Base Part Number: VI-J60
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used to convert electric current from one circuit to another. The VI-J60-EZ is a type of DC-DC converter, specifically, a reduced voltage DC-DC converter. It is designed to reduce voltage and provide power to multiple electrical systems or circuits.

The VI-J60-EZ is based on the CY7C60113 chip from Cypress Semiconductor. This chip is a DC-DC converter with an integrated monolithic controller. The main features of the CY7C60113 are low output ripple, low voltage adjustment range, frequency setting by means of a resistor, and low quiescent current. The design of the VI-J60-EZ also includes a PFC (Power Factor Correction) stage, which is designed to reduce power losses and increase system efficiency.

The VI-J60-EZ is widely used in industrial automation, automotive, telecom, and medical applications. It is available in two versions: single and dual output. Each version can be configured with output voltage range from 3.3 to 5.5 volts. The single output version is capable of providing up to 2.5 amps of output current, while the dual output version is capable of providing up to 5 amps of output current.

The VI-J60-EZ is designed to be connected to a 12, 24, or 48 Volt DC input. To supply power to the system, the input voltage is converted to the desired output voltage and current. This is achieved by means of a two-stage power conversion process. The first stage involves the PFC stage, which converts the input voltage to a higher regulated voltage. The second stage is the DC-DC conversion stage, which is responsible for reducing the input voltage to the desired output level.

The working principle of the VI-J60-EZ is quite simple. Input voltage is applied to the PFC stage, which boosts the input voltage to a higher regulated level. This higher voltage is then supplied to the DC-DC conversion stage, where the voltage is regulated and the current is controlled. The output voltage is then supplied to the system through the output conductor.

The VI-J60-EZ also comes with a protection circuit that prevents the converter from overloading or overheating. This circuit monitors the output current and voltage and shuts down the converter if either exceeds the pre-set values.

The VI-J60-EZ is a reliable and efficient DC-DC converter that can be used to provide power to multiple systems. Its low output ripple and PFC stage provide clean and reliable power, while its integrated protection circuit ensures safe operation. Its wide voltage input range makes it suitable for a variety of applications, making it ideal for industrial automation, automotive, telecom, and medical applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics