MNR18E0APJ390

Resistance (Ohms):	39
Tolerance:	±5%
Number of Resistors:	8
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	16
Power Per Element:	62.5mW
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 125°C
Applications:	Automotive AEC-Q200
Mounting Type:	Surface Mount
Package / Case:	1506, Convex, Long Side Terminals
Supplier Device Package:	--
Size / Dimension:	0.150" L x 0.063" W (3.80mm x 1.60mm)
Height - Seated (Max):	0.022" (0.55mm)
Series:	MNR
Packaging:	Tape & Reel (TR)
Part Status:	Discontinued at Digi-Key
Circuit Type:	Isolated

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are one of the most useful and stable components in the electronic world. The MNR18E0APJ390 is a resistor network which uses a unique design to facilitate multiple functionalities. This resistor network is a combination of two components, a transistor array and resistors in a single package, and is suitable for use in various applications such as digital signal processing and analog audio filters.The MNR18E0APJ390 is a nine-resistor array which consists of five resistors in the transistor array and four in the resistor array. The transistor array uses two transistors, one P-channel and one N-channel, to produce a symmetrical current between its two terminals. The resistor array, on the other hand, consists of four resistors which are connected in parallel to provide additional stability and reduce noise. The array also contains two capacitors which are used to reduce the effect of high frequency noise signals.The MNR18E0APJ390 is designed for use in a variety of digital signal processing and analog audio filters as well as DC/DC converters, switch mode power supplies, and operational amplifiers. Due to its unique design, the MNR18E0APJ390 can provide significantly improved stability and reduce noise in various electronic systems.The MNR18E0APJ390 resistor network is designed to provide an efficient method for controlling the output voltage and current of the transistor array. When the MNR18E0APJ390 resistor network is connected to a power source, the resistors in the array are connected in parallel to form a low resistance path to the power source. Since the resistors have a low resistance, the current flowing from the power source is evenly shared across the resistors. This evenly distributed current causes the transistor array to produce a symmetrical current, which is then used to control the output voltage and current of the transistor array.In addition to the current flow, the MNR18E0APJ390 resistor network also helps to reduce noise by providing a low impedance path for high frequency noise signals. This helps to suppress the effect of noise on the signal, resulting in improved stability and lower distortion levels.The MNR18E0APJ390 resistor network is an ideal choice for applications where improved stability and reduced noise levels are critical. The combination of the low impedance path, symmetrical current flow, and noise reduction help to make the and MNR18E0APJ390 a very reliable and consistent resistor network. The unique design of the MNR18E0APJ390 also allows for further customization and flexibility by allowing users to customize the resistor value and the capacitance of the array. The MNR18E0APJ390 is a versatile resistor network which can be used for many different applications and is available in a variety of package sizes and configurations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description