MNR18E0APJ430

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are components used to create specific voltage and current characteristics for a range of applications. The MNR18E0APJ430 is a resistor network designed specifically to meet the requirements of medium-power automotive systems. The MNR18E0APJ430 is designed to provide a high-level interface between the voltage regulator, alternator, and engine controller systems. This type of resistor network is commonly used to control the alternator load on medium-power automotive systems.

The MNR18E0APJ430 is a four-resistor network composed of four individual resistors in series. The device has an overall resistance of 4.7 ohms and a rated current of up to 3.2 amps. The resistors are housed in a plastic housing and mounted on a single base, creating an efficient and space-saving device. All four resistors are connected in series, creating a single-ended voltage divider that can be used to provide the desired voltage to the alternator\'s engine controller interface.

The MNR18E0APJ430 can be used in a wide range of applications. The devices can be used to control the alternator load in medium-power automotive systems as well as many other power electronic applications such as motor drive systems, robotic motion control systems, and other power electronic applications. The device can also be used as a voltage reference for both AC and DC systems.

The MNR18E0APJ430 is designed to work in a variety of settings. The device can be powered directly from the vehicle\'s 12V or 24V system as well as an external source such as a generator or solar panel system. The device is designed to provide a high accuracy current regulation over a wide temperature range. This is accomplished by incorporating thermal isolation between the resistors in the package, ensuring a stable and reliable performance.

The MNR18E0APJ430 works on the principle of voltage division. This means that the device divides the voltage applied to it into several parts, providing a stable and reliable voltage output. This voltage is then used as a reference source for the alternator controller. The device also provides a reference voltage, which is used to regulate the alternator current.

The MNR18E0APJ430 is an ideal choice for automotive systems and other power electronic applications. Its high accuracy, small size, and space-saving design make it a reliable and cost-effective choice for medium-power automotive systems. The device is designed to provide a high-level interface between the voltage regulator, alternator, and engine controller systems, providing a reliable and consistent voltage reference for the alternator controller.

The specific data is subject to PDF, and the above content is for reference