RLR07C1001FSB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors, in general, are fixed-value resistors which are inserted through a mounting hole drilled into a printed circuit board (PCB) and then soldered to the board on the back side. RLR07C1001FSB14 is an example of one of these types of through-hole resistors. It has a power rating of 1W, and is commonly used in applications that require higher power than usual. It is often found in automotive and power electronics systems, and it is widely used in communications and networking, consumer electronics, and instrumentation and measurement systems.

The working principle of RLR07C1001FSB14 is based on Ohm’s Law. This law states that the voltage across a resistor is directly proportional to the current flowing through it. Therefore, by controlling the current through the resistor, the voltage across it can be controlled. This is important in applications where the voltage needs to be accurately maintained, such as in power supplies and motor controllers.

The resistance of RLR07C1001FSB14 is determined by the number of copper windings. The resistance of the copper, combined with the size of the winding and the thickness of the body gives the overall resistance of the device. RLR07C1001FSB14 also has a tolerance of ±5% which means that the resistance value can vary from one device to another within a certain range. This tolerance helps ensure that the device will perform consistently even if the surrounding environment changes.

RLR07C1001FSB14 is available in a variety of packages and styles such as radial, axial, and high power leaded resistors. For optimal performance, it is important to select the right resistor for the application. Depending on the application, different types of resistors may be required such as surface-mount or leadless resistors.

In summary, RLR07C1001FSB14 is a type of through-hole resistor which is commonly used in automotive and power electronics systems. It has a power rating of 1W and a tolerance of ±5%. It works based on Ohm’s Law, and is available in a variety of packages and styles. By selecting the right resistor for the application, optimal performance can be achieved.

The specific data is subject to PDF, and the above content is for reference