MP915-0.50-1%

Series:	Kool-Pak®MP900
Packaging:	Tube
Part Status:	Active
Resistance:	500 mOhms
Tolerance:	±1%
Power (Watts):	15W
Composition:	Thick Film
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	-20/ +80ppm/°C
Operating Temperature:	-55°C ~ 150°C
Package / Case:	TO-126-2
Supplier Device Package:	TO-126
Size / Dimension:	0.320" L x 0.110" W (8.12mm x 2.79mm)
Height - Seated (Max):	0.450" (11.44mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThrough hole resistors, also known as wire wound resistors, are commonly used in electrical and electronic circuits. Typically they are constructed by winding a length of a special alloy wire around a cylindrical form, usually made of ceramic or fiberglass. The resistance value of the resistor is determined by the number of turns of wire in the winding, and the distance between the turns. There are several types of through hole resistors available on the market - from simple carbon-film and metal-film types, to more complex SMD (Surface Mounted Device) types. The MP915-0.50-1% is an example of a through hole resistor, and is specifically designed for use in low voltage digital and analog systems. It has a resistance value of 500 ohm, meaning it can be used to reduce the current in a circuit by 500 ohm or less. Additionally, it has a tolerance of 1%, which means that its actual resistance is expected to be within one percent of the stated value. The MP915-0.50-1% resistor is a through-hole type, meaning it is designed to be mounted directly onto a printed circuit board (PCB) through the use of a soldered connection. The application field of the MP915-0.50-1% resistor is primarily in low voltage, digital and analog systems, such as in computers, cell phones, and other audio/visual equipment. It is often used for voltage-divider circuits, which are used to adjust the voltages in a system according to the desired input. It is also used to match the output impedance of one circuit with the input impedance of another circuit, in order to ensure optimal system performance. Additionally, the MP915-0.50-1% resistor can be used to create filters in electrical systems, allowing certain frequencies to pass while blocking out others.As for the working principle of the MP915-0.50-1%, it is based on the basic law of electricity, which states that the voltage drop across a resistor is equivalent to the current passed through it multiplied by the resistance. When electricity is passed through the MP915-0.50-1%, it creates a small voltage drop across the resistor, which is determined by the resistance value. This voltage drop acts as a barrier to the flow of electricity, reducing the current and ensuring that the desired voltage is achieved in the system. In conclusion, the MP915-0.50-1% through hole resistor is an important component in low voltage, digital and analog systems. Its resistance value of 500 ohm, tolerance of 1%, and ability to be soldered directly to a PCB are all important factors in its effectiveness and popularity in these applications. Furthermore, its underlying working principle is based on the basic law of electricity, making it an essential component in any electrical or electronic system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description