HHV-25JT-52-20K Resistors

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	20 kOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are electronic devices used to control the flow of electricity in a circuit. Through hole resistors are one type of resistor component that is designed to be installed in a printed circuit board (PCB) by soldering it with wires through the holes of the PCB. The HHV-25JT-52-20K resistor is one such example of a through hole resistor and it is widely used in many electrical and electronic applications due to its effectiveness. This article will provide an overview of the HHV-25JT-52-20K\'s application field and working principle.

Application Field of HHV-25JT-52-20K

The HHV-25JT-52-20K is a through hole resistor capable of handling voltages up to 25 volts and currents up to 2 amps. It is usually used in applications that require low impedance and stable operation. The following are some of the most common applications of HHV-25JT-52-20K: - Power Supply filter circuits: The most common use of this type of resistor is in power supply filter circuits. The HHV-25JT-52-20K is able to provide high noise reduction due to its low impedance and high frequency characteristics. - Amplifier Circuits: This type of component can also be used in amplifier circuits and other signal conditioning circuits that require a low impedance signal. The device can provide a low impedance input and output signal for various types of amplifiers.- Motor Circuits: HHV-25JT-52-20K can be used in motor control circuits that require a low impedance path for current to flow. This type of resistor is able to provide a stable operation for various motor control circuits.- Oscillator Circuits: The resistor is also often used in oscillator circuits that require a high frequency signal. It is able to provide a stable signal with low noise at high frequencies. - Switching Power Supply Circuits: The device can be used in switching power supply circuits as a low impedance resistor. It can provide a low resistance path for current to flow, which is necessary for switching power supplies.

Working Principle of HHV-25JT-52-20K

The HHV-25JT-52-20K is a through hole resistor that is designed to provide a low impedance path for electricity to flow through. It works by using an internal resistor, usually made of silicon, which resists the flow of electricity through the resistor. The resistor is usually connected to the two leads of a diode that allows the current to flow in only one direction. The resistor acts as an impedance limitation device that limits the amount of current that passes through it. This is done by creating a voltage drop across the resistor, which is determined by Ohm\'s law. The voltage drop can be calculated by multiplying the current passing through the resistor in amps by the resistance value in ohms. The HHV-25JT-52-20K has a resistance value of 20K ohms, which allows for a voltage drop of 200 volts when 2 amps are flowing through the device. The resistor also works by dissipating excess heat energy, which is created when current passes through it and creates an electrical field. This excess heat energy is then dissipated through the resistor and into the surrounding environment. The resistor is also able to handle high frequencies and can provide a stable operation in circuits that require a low impedance signal.

Conclusion

The HHV-25JT-52-20K is a through hole resistor that is designed to provide a low impedance path for electricity to flow through. It is commonly used in a variety of applications, such as power supply filter circuits, amplifier circuits, motor circuits, oscillator circuits, and switching power supply circuits. The device works by creating a voltage drop across the resistor, dissipating excess heat energy, and providing a stable operation at high frequencies.

The specific data is subject to PDF, and the above content is for reference